- Main Features:
- Ultra-low-noise, high-gain Revolution Preamps™ (-131.5dBV EIN, 76dB gain)
- Four high-quality Neutrik® combo inputs for connecting microphones and instruments
- Nine individually assignable channels with six broadcast-quality physical faders and three virtual faders
- High-performance quad-core audio engine
- Studio-grade APHEX® audio processing and on-board effects
- Eight fully programmable SMART pads with bank switching
- Dual USB-C interfaces and advanced Bluetooth® connectivity
- Multitrack or stereo recording to a microSD™ card, USB storage device or computer
- Four high-quality headphone outputs and ¼-inch balanced line outputs
- 5.5-inch high-definition touchscreen with haptic feedback and rotary encoder for easy navigation and control
- Specifications:
- Freq Range: Mic Inputs: 20Hz – 20kHz
- Monitor Outputs: 20Hz – 20kHz
- Microphone Input Impedance: 4KΩ
- Instrument Input Impedance: 1MΩ
- Input Dynamic Range: 113dB
- Preamplifier Gain Range: 0 – 76dB
- Equivalent Noise: -131.5dBV (A-weighted)
- Line Output Maximum Level: 4dBu
- Headphone Output Power: 250mW
- Power Requirements: 30W USB-C PD (15V, 2A)
- Analogue Audio Input Connectivity: 4 x combo jack inputs (microphone, line, instrument)
- Analogue Audio Output Connectivity: 2 x balanced line output, 4 x headphone output
- Bluetooth Connectivity: Bluetooth audio with Music and Headset profile (wide band speech)
- USB Interface 1: 1 x 2-in/16-out multichannel device, 1 x
- 2-in/2-out with mix-minus
- USB interface 2: 1 x 2-in/2-out with mix minus
- Bit Depth: 24bit
- Sample Rate: 48kHz
- Recording Storage: microSDHC, microSDXC, USB-C removable drive (exFAT – minimum 100MB/s)
- Data transfer: USB 3.0 SD card reader 130MB/s
- Network connectivity: Wifi 802.11g/n/ac 2.4GHz and 5GHz, Ethernet 100/1000
- OS Requirements – macOS 10.15 or later, Windows 10 Version 1803 or later, Windows 11
- Audio-Technica introduces a dynamic broadcast microphone that delivers rich, natural, condenser-like sound. Featuring a large diaphragm with patented floatingedge construction for optimal performance, along with a humbucking voice coil, multistage windscreen and other pro essentials, the durable, all-metal BP40 keeps the audio focused on the broadcaster to maintain a commanding vocal presence free from electromagnetic interference (EMI) and popping.
- Main Features:
- Rich, natural condenser-like sound
- Large diameter diaphragm with patented floating-edge construction for optimal performance
- Humbucking coil prevents electromagnetic interference (EMI)
- Optimized capsule placement for commanding vocal presence even at a distance
- Hypercardioid polar pattern provides maximum feedback rejection and isolation of desired sound source
- Switchable 100 Hz high-pass filter
- Multistage windscreen provides superior internal pop filtering
- Rugged, all-metal construction for dependable use in professional broadcast environments
- Specifications:
- Element: Dynamic
- Polar Pattern: Hypercardioid
- Frequency Response: 50-16,000 Hz
- Low Frequency Roll-off: 100 Hz, 6 dB/octave
- Open Circuit Sensitivity: –48 dB (3.9 mV) re 1V at 1 Pa
- Impedance: 450 ohms
- Switch: Flat, roll-off
- Weight: 632 g without AT 8483
- Dimensions: 164.0 mm long, 56.0 mm diameter
- Output Connector: Integral 3-pin XLRM-type
- Accessories Furnished: AT8483 mounting clamp for 5/8”-27 threaded stands; 5/8”-27 to 3/8”-16 threaded adapter; soft protective pouch
