- Main Features:
- Ultra-low-noise, high-gain Revolution Preamps™ (-131.5dBV EIN, 76dB gain)
- Four high-quality Neutrik® combo inputs for connecting microphones and instruments
- Nine individually assignable channels with six broadcast-quality physical faders and three virtual faders
- High-performance quad-core audio engine
- Studio-grade APHEX® audio processing and on-board effects
- Eight fully programmable SMART pads with bank switching
- Dual USB-C interfaces and advanced Bluetooth® connectivity
- Multitrack or stereo recording to a microSD™ card, USB storage device or computer
- Four high-quality headphone outputs and ¼-inch balanced line outputs
- 5.5-inch high-definition touchscreen with haptic feedback and rotary encoder for easy navigation and control
- Specifications:
- Freq Range: Mic Inputs: 20Hz – 20kHz
- Monitor Outputs: 20Hz – 20kHz
- Microphone Input Impedance: 4KΩ
- Instrument Input Impedance: 1MΩ
- Input Dynamic Range: 113dB
- Preamplifier Gain Range: 0 – 76dB
- Equivalent Noise: -131.5dBV (A-weighted)
- Line Output Maximum Level: 4dBu
- Headphone Output Power: 250mW
- Power Requirements: 30W USB-C PD (15V, 2A)
- Analogue Audio Input Connectivity: 4 x combo jack inputs (microphone, line, instrument)
- Analogue Audio Output Connectivity: 2 x balanced line output, 4 x headphone output
- Bluetooth Connectivity: Bluetooth audio with Music and Headset profile (wide band speech)
- USB Interface 1: 1 x 2-in/16-out multichannel device, 1 x
- 2-in/2-out with mix-minus
- USB interface 2: 1 x 2-in/2-out with mix minus
- Bit Depth: 24bit
- Sample Rate: 48kHz
- Recording Storage: microSDHC, microSDXC, USB-C removable drive (exFAT – minimum 100MB/s)
- Data transfer: USB 3.0 SD card reader 130MB/s
- Network connectivity: Wifi 802.11g/n/ac 2.4GHz and 5GHz, Ethernet 100/1000
- OS Requirements – macOS 10.15 or later, Windows 10 Version 1803 or later, Windows 11
- The Electro-Voice RE320 is a professional quality dynamic microphone boasting extremely low noise and the highest level of predictable tonal and transient response.
- Ideal for capturing voice and a wide variety of electric and acoustic instrument sources, the RE320 delivers superb detail, dynamic content and natural tonal performance. Its unique dual voicing switch selects from two response curves, making the RE320 essentially two microphones in one. One switch position delivers voice, electric and acoustic instruments with a lively, yet natural tonal response, while the other switch position delivers a curve designed specifically for kick drums.
- Electro-Voice RE320 Features:
- Variable-D pattern proximity control minimizes positional and off-axis tonal shifts
- Integrated hum-bucking coil and integral pop filters provide virtually noiseless performance
- Neodymium magnet structure creates higher output with faster transient response and greater high-frequency detail
- Unique dual-voicing switch selects from two response curves
- Extremely durable build, fit and finish
- Electro-Voice RE320 Specifications:
- Case Material: Metal
- Connector Type: 3-pin XLR
- Diameter (Max): 49.2 mm (1.94")
- Element: Dynamic N/Dym Magnet Structure
- Finish: Semi gloss black
- Frequency Response: 30 - 18,000 Hz (kickcurve), 45 - 18,000 Hz (generic curve)
- Impedance, Low-Z balanced: 150 ohms
- Mic Type: Voice/Instrument
- Open Circuit Voltage: 2.5 mV/Pascal
- Polar Pattern: Cardioid
- Power Requirement: None
- Height: 8.53" (216.7 mm)
- Net Weight: 24.02 oz (681 g)