The STR-H6A rack mounts 6 STICK-ON modules. This adapter fits 10.4" racks.

The RU-ADA4D is a four channel stereo audio distribution amplifier with input and output gain adjustments and input level metering. The module may be operated in mono to provide up to eight...

The RDL PS-24AS is a 24 Vdc switching power supply with a North American AC plug.RDL PS-24AS Specifications:Input: 100 to 240 VACOutput: 24 Vdc, 500 mA (UL, CSA)Dimensions: 1.65 in. (4.2 cm) x 2.75...

The Radio Design Labs HR-MCP2 dual-channel microphone compressor offers full studio-quality low-noise performance at any gain setting while delivering a consistent audio output level over wide...

The Radio Design Labs STU-BA2 two-channel interface amplifier is used in any application requiring conversion from unbalanced consumer format signals to professional +4 dBu. It may be used to balance...

The RDL PS-24AS is a 24 Vdc switching power supply with a North American AC plug.RDL PS-24AS Specifications:Input: 100 to 240 VACOutput: 24 Vdc, 500 mA (UL, CSA)Dimensions: 1.65 in. (4.2 cm) x 2.75...

The RDL HR-UDC1 is the ideal choice in installations where digital audio signals must be converted between consumer and professional formats. The input and output support AES/EBU, S/PDIF and AES-3ID...

The RDL HR-DSX4 is the ideal choice in installations requiring high quality source selection between digital audio signals, offering solid-state switching to select one of four inputs. Each input may...

The ST-VOX1 is an Audio Controlled Relay in the STICK-ON® series. When used in intercom or talkback applications, the ST-VOX1 may be triggered directly from an unbalanced microphone. In many such...

The STA-2A is a dual-channel, line-level audio preamplifier. Each channel is identical. The audio inputs are bridged at 20 kΩ and accept either an unbalanced or a balanced audio signal. Gain is...

The ST-PA2 features a single, unbalanced audio input, a gain control, and two outputs. The first output is designed to deliver a clean 2 watts RMS into an 8 Ω speaker. The second output is intended...

The ST-TC1 is intended to be connected to an on-site telephone system switching unit KSU. It is NOT intended to be connected directly to a telephone CO line. Connections from the ST-TC1 go into the...