- IFBlue IFBR1C Main Features:
- Compatible with Lectrosonics IFB transmitters including Hybrid transmitters in IFB mode
- Stores up to 10 frequency presets in memory
- LCD interface for programming and operation
- High sensitivity for extended operating range indoors or outdoors
- USB port for firmware updates
- Compact, rugged injection molded ABS housing
- Attached battery door
- 2 AA batteries; alkaline, lithium, or NiMH rechargeables (supplied)
- What's Included:
- Qty-1 Halter Technical PEEKO 40in Cable Mono Earbud
- Qty-1 Lectrosonics IFBlue IFBR1C Wireless Receiver (A1 Frequency)
- IFBlue IFBR1C Specifications:
- Frequency Selection Steps: 25 kHz; VHF: 175 kHz
- Sensitivity: 1 uv (20 dB SINAD)
- Signal/Noise ratio: 95 dB A-weighted
- Squelch quieting: 90 dB
- AM rejection: 50 dB, 10 uV to 100 mV
- Modulation acceptance: ±20 kHz
- Spurious rejection: Greater than 70 dB
- Operating temperature range: -20 to 40 degrees C.
- Third order intercept: 0 dBm
- Frequency response: 100 Hz to 10 kHz, (+/-1 dB)
- Audio output: 1V RMS into 50 ohms minimum
- Antenna: Headphone cable
- Min. headphone impedance: 16.0 Ohms
- Programmable memory: 10 frequencies can be stored as presets
- Controls:
- Top Panel: Single knob controls Audio Output Level and Power On - Side Panel: Membrane switches with LCD interface for Frequency Selection and Preset function
Indicators: Multi-color LED indicator for power on and battery status
- Battery: Two AA batteries (+1.5 VDC each)
- Battery Life: 10 hours (Alkaline), 12 hours (NiMh), 20 hours, 40 minutes (Lithium)
- Current consumption: 120 mA
- Dimensions:
Height: 107mm/4.20 in. (including knob)
Width: 67mm/2.60 in. (at widest point)
Depth: 28mm/1.10 in. (at widest point of clip)
Weight: 4.6 oz (130 g) with batteries