null
Illustrative image of: Inovonics INOmini 679: Monitoring: 679

Inovonics INOmini 679

Inovonics

BSW PART:
679

INOmini FM HD Radio Receiver

More Monitoring More Inovonics
$990.00 $1,100.00
You save $110.00

*Reboxed and resealed
*3 year warranty

The INOmini 679 is Inovonics’ third-generation, small form-factor FM and FM-band HD Radio broadcast monitor receiver. It receives both analog FM and digital HD1-HD8 radio channels for confidence monitoring and delivers a high-quality audio feed for rebroadcast or program distribution throughout the broadcast facility with adjustable analog and AES digital audio outputs. FM RBDS and HD Radio PAD data may be called-up for display on the front-panel LCD screen. Strictly for professional applications, the INOmini 679 purposely does not blend between the analog FM and HD1 simulcast like a consumer radio. Tuning and mode preferences are held in nonvolatile memory and all settings are restored following a power cycle.

$990.00 $1,100.00
You save $110.00

Free Shipping

Out of stock

Add to quote
Qualifies for free shipping

  • Main Features:
  • The INOmini 679 is a sensitive, DSP-based (SDR) radio that receives standard FM analog and FM/HD Radio broadcasts.
  • Stays on-mode and on-channel through signal and power loss; does not blend between FM and HD.
  • Easy front-panel setup uses jog-wheel menu navigation with a large LCD display. Accurate, hi-res metering shows RF signal and audio levels, RBDS/PAD data and reception metrics. Critical system menus are hidden.
  • Balanced analog and AES-digital program line outputs are available simultaneously; levels are independently adjustable.
  • Flashing-red front-panel alarms and rear-panel ‘tallies’ indicate HD Reception Loss, Low Signal and Audio Loss.
  • ‘Split Mode’ audio monitoring aids transmission diversity delay setup.
  • The LCD displays RSSI, SNR, Cd/No, Multipath and HD Level metrics to help with receive antenna alignment.
  • When issued, free firmware updates are easily installed in the field.
  • Specifications:
  • Tuning Range: 87.5MHz – 107.9MHz in 100kHz steps
  • Antenna Input: 75-ohm (F)
  • HD Radio™ Channels: Selectable HD1 through HD8
  • Sensitivity/SNR: 10dBμV for 50dB monaural-FM S/N
  • Audio Response:
  • FM: ±1dB, 30Hz – 15kHz; de-emphasis is menu-selectable for 75μs or 50μs
  • HD Radio™: ±0.25dB, 20Hz – 20kHz
  • FM Stereo Modes: Stereo / Stereo Auto-Blend / Forced-Mono
  • RDS Fields Displayed: PI (and call), C/T, PTY, PTYN, PS, RT, RT+1, RT+2
  • HD Radio™ Channels: Selectable HD1 through HD8
  • HD Pad Fields Displayed:
  • HD Name/Slogan, HD PTY, FCC ID, HD Artist, HD
  • Title, HD Album, HD Genre, Primary Service Mode, Coded Mode, Transmit
  • Gain, Transmit Blend Control
  • Program Audio Outputs:
  • Balanced Analog: (XLR) Left and Right outputs are adjustable from –15dBu to +15dBu in 0.2dB steps.
  • AES Digital: (XLR) output at 44.1kHz is adjustable from –30dBFS to 0dBFS in 0.2dB steps.
  • Headphone Jack: (3.5mm TRS) has adjustable listening level.
  • Front-Panel Red-Flashing Alarms:
  • HD Loss: Fixed metrics determine loss of HD Radio reception.
  • Low Signal: Alarm and reset trigger levels are independently adjustable relative to the FM carrier level display.
  • Audio Loss: Alarm responds to monitored service (FM or HD Radio). Alarm threshold is adjustable between 0dB and –40dB, and the alarm delay interval is adjustable between OFF and 120 seconds.
  • Alarm “Tallies”: Individual open-collector NPN transistor outputs to ground are programmable for logic polarity.
  • USB Port: The front-panel mini-USB port allows the quick uploading of firmware updates when issued.
  • Power Requirement: 12VDC at 335mA; a universal 90-240 VAC inline switching power supply is included with the INOmini 679 receiver.
  • Mounting Options: An optional rack adapter accepts up to three INOmini modules in a 1U, 19-inch rack space. The 679 also may easily be fastened to any convenient surface with two small screws.
  • Size and Weight: 1.6”H x 5.5”W x 5.5”D; 4 lbs. shipping weight