- Main Features:
- Factory inspected and repackaged
- Carries full 3 year Inovonics manufacturer warranty
- Supports EAS Messages and Alerts over RDS
- Separate RDS and MPX+RDS outputs for sidechain/loop through
- Assignable GPIO (2x in, 2x out)
- Built in webserver for control/monitoring of all parameters
- OLED display with easy to navigate menus
- Email Alarms for pilot loss and DPS/RT not updated. SNMP support.
- IP whitelisting for automation data ports
- UDP multicast support
- Firmware is remotely updateable via webserver
- Specifications:
- RDS Applications Supported:
-PS (Program Service Name) An 8-character station ‘street name’ or 128-character scrolling message (song info, promos, advertising, etc.)
-PI (Program Identification) 732 automatically calculates PI codes for the US and Canada
-PTY (Program Type) Identifies your station’s format
-Supports EAS Messages and Alerts over RDS
-PTYN (Program Type Name) A further refinement of your type or style of programming
-TP / TA (Traffic Program / Traffic Announcement) A utility that calls attention to critical traffic or other emergency situations. Some RDS radios automatically retune to these announcements, even overriding CD or MP3 playback
-AF (Alternative Frequencies) Up to 25 frequency entries for rebroadcast ‘translators.’
-RT (RadioText) A 64-character block of plain-text messaging that can be called-up on the faceplate of some RDS radios. RadioText is separate from, and in addition to, scrolling-PS messages
-RT+ (RadioText Plus) An updated standard for song info display
-CT (Clock Time and Date) The 732 sends time to RDS radios. The feature is set and updated automatically with an Internet connection
-DI (Decoder Information) The mono/stereo data flag
-M/S (Music/Speech Switch) The mixed-music or speech-only data flag - Scheduler: Up to thirty, PS, RadioText messages, or commands may be programmed for transmission at specified times on prearranged dates or recurring days of the week.
- RDS Data Delay: Scrolling-PS, RT and RT+ message updates may be delayed in 1-second increments up to 200 seconds to match profanity and transmission diversity delays.
- MPX Or Pilot Input: An unbalanced, bridging (BNC) input accepts either the composite/multiplex (MPX) signal (5V p-p, max.) or 19kHz TTL level pilot sync from the stereo generator. The 732 reverts to an internal crystal timebase for monaural transmissions.
- RDS Output: An unbalanced, 75-ohm (BNC) outputs the RDS subcarrier to feed a RDS/SCA input.
- RDS + MPX Output: The RDS subcarrier (at 1/3rd the level of the RDS Output) is internally mixed with the MPX input and the combined signal appears at the encoder output at unity gain.
- RDS Injection Level: Subcarrier level is adjustable from zero to 3.7V p-p.
- Front-Panel Data Entry: The front-panel OLED and jog wheel allow on-site setup of all operating parameters.
- Serial Data Port: A rear-panel RS-232 connector (DB-9) accepts static encoder programming and dynamic messaging from station automation. The 732 accommodates all common data rates between 300 and 115,200 baud.
- LAN (IP-Network) Port:
-A rear-panel Network connector (RJ-45) conforms to TCP/IP networking protocols. Two TCP ports and two UDP port are provided connectivity from multiple data sources.
-A built in HTTP server provides control and monitoring of all settings. Firmware updates can be uploaded directly to the unit.
-SNMP support allows control and monitoring of all settings.
-Emails can be sent for various alarm conditions. - TA Switching: The temporary TA flag is set either by a software command or with a contact closure through a rear-panel terminal strip. The 732 features a programmable TA-timeout utility to preclude TA flag violations.
- Power Requirements: 88VAC-264VAC, 48Hz-63Hz; (‘universal’); 12W
- Size and Weight:
-23” x 16” x 2” (2U); 8 lbs
-584mm x 406mm x 51mm ; 3.6 kg - Environmental: Continuous operation at ambient temperatures between 32ºF/0ºC and 122ºF/50ºC; 0-95% relative humidity, non-condensing, altitudes to 10,000ft/3,048m.