- Main Features:
- Monitor your DAB and DAB+ signal from any remote location via the Internet
- Monitor both off-air DAB+ radio and Aux audio levels simultaneously with meters.
- StationRotation™ - monitor all station presets by ‘round robin’ sequencing, each with its specific alarm parameters. Select which presets to include in StationRotation.
- Enhanced audio streaming capabilities allowing up to 10 simultaneous remote listeners.
- Streaming is HE-AACv2 for improved audio quality and UDP streaming is supported for skimmers and recording.
- BandScanner™ gives a spectrum plot of all or part of Band III
- Sends instant error messages via email or SMS text; logs signal loss, audio loss, DAB/DAB+ loss
- Easy setup and operation; full SNMP support
- Headphone jack
- Password protection with two access levels. // Remote firmware updates. // User Manual is available on the Web interface.
- Specifications:
- Tuning Range: DAB Band III, Mode I (174.928MHz- 239.200MHz); all EBU-specified frequency allocations (Blocks 5-12, A-D) plus Block 13 A-F
- Receiver Sensitivity: 10μV for error-free reception
- Antenna Input: 75-ohm (BNC)
- Audio Codecs: MPEG-1 Audio Layer 2 (MP2); HE-AAC (AAC+)
- Audio Response: ±0.25dB, 20Hz-20kHz
- AUX Program Line Input: AES3 (XLR) digital AUX input accepts 32kHz, 44.1kHz, 48kHz sampling with programmable input sensitivity.
- Network Connection: RJ45 jack accepts universal TCP/IP connector to LAN/router/Internet.
- Headphone Jack: 3.5mm TRS with menu-adjustable level
- Signal Parameters & Metadata Displayed: Frequency, RSSI, SNR, FIC Quality (FQ), CNR, FFT Offset, CNR FIB Error, CU Level, Ensemble Label & ID, Total Services, Total Components, Total CU, Time, Dynamic Label Segment & Size, Sample & Bit Rates, Gain, Mode & ServiceMode, Protection Info, Current CU & Address, Frequency & Block, Service Label & ID, PTY, Component Label & ID, Global ID, Country, Language, Character Set ID, L/R Audio Levels
- Alarms: Audio Loss, Low Signal, DAB Loss; adjustable thresholds and delays
- Alarm Logs: Alarms are logged and may be downloaded as daily, weekly or monthly CSV files.
- Power Requirement: +12VDC at 110mA (2.1mm x 5.5mm coaxial); a universal inline switchmode power supply is provided.
- Mounting Options: An optional rack adapter accepts up to three INOmini modules in a 1U rack space.
- Size and Weight:
-1.6”H x 5.5”W x 5.5”D
-4 lbs shipping weight - Environmental: Continuous operation at ambient temperatures between 32ºF/0ºC and 122ºF/50ºC; 0-95% relative humidity, non-condensing, altitudes to 10,000ft/3,048m.
