- Main Features:
- Ultra-low-noise, high-gain Revolution Preamps™ (-131.5dBV EIN, 76dB gain)
- Four high-quality Neutrik® combo inputs for connecting microphones and instruments
- Nine individually assignable channels with six broadcast-quality physical faders and three virtual faders
- High-performance quad-core audio engine
- Studio-grade APHEX® audio processing and on-board effects
- Eight fully programmable SMART pads with bank switching
- Dual USB-C interfaces and advanced Bluetooth® connectivity
- Multitrack or stereo recording to a microSD™ card, USB storage device or computer
- Four high-quality headphone outputs and ¼-inch balanced line outputs
- 5.5-inch high-definition touchscreen with haptic feedback and rotary encoder for easy navigation and control
- Specifications:
- Freq Range: Mic Inputs: 20Hz – 20kHz
- Monitor Outputs: 20Hz – 20kHz
- Microphone Input Impedance: 4KΩ
- Instrument Input Impedance: 1MΩ
- Input Dynamic Range: 113dB
- Preamplifier Gain Range: 0 – 76dB
- Equivalent Noise: -131.5dBV (A-weighted)
- Line Output Maximum Level: 4dBu
- Headphone Output Power: 250mW
- Power Requirements: 30W USB-C PD (15V, 2A)
- Analogue Audio Input Connectivity: 4 x combo jack inputs (microphone, line, instrument)
- Analogue Audio Output Connectivity: 2 x balanced line output, 4 x headphone output
- Bluetooth Connectivity: Bluetooth audio with Music and Headset profile (wide band speech)
- USB Interface 1: 1 x 2-in/16-out multichannel device, 1 x
- 2-in/2-out with mix-minus
- USB interface 2: 1 x 2-in/2-out with mix minus
- Bit Depth: 24bit
- Sample Rate: 48kHz
- Recording Storage: microSDHC, microSDXC, USB-C removable drive (exFAT – minimum 100MB/s)
- Data transfer: USB 3.0 SD card reader 130MB/s
- Network connectivity: Wifi 802.11g/n/ac 2.4GHz and 5GHz, Ethernet 100/1000
- OS Requirements – macOS 10.15 or later, Windows 10 Version 1803 or later, Windows 11
- The Electro-Voice RE20 is a professional-quality dynamic cardioid microphone created specially for recording, broadcast and sound-reinforcement applications requiring essentially flat response over a very wide frequency range. The wide frequency response, coupled with excellent transient response, make the RE20 easily comparable to the finest condenser cardioid microphones and an easily operated “bass tilt down” switch corrects spectrum balance for use in longreach situations or other applications where bass attenuation is needed.
- Cardioid Pattern
- A true cardioid microphone, the RE20 offers greatest rejection at 180º off axis - directly to the rear of the microphone. Pattern control is so consistent that the frequency response is nearly independent of angular location of the sound source, creating virtually no off-axis coloration, yet providing greatest possible rejection of unwanted sounds.
- Integrated Pop Filter
- An integral blast and wind filter covers each acoustic opening on the RE20. In recording sessions or on stage, singers can “close talk” the microphone, singing with their lips almost touching the grille screen with no worry of “P-pops” or excessive sibilance. Part of the filter also shock mounts the internal microphone element, reducing the transfer of vibrations from external sources. The exceptional performance of the RE20 is achieved by using a large Acoustalloy diaphragm in combination with an exceptionally low-mass aluminum voice coil. Using this diaphragm assembly, the RE20 is capable of reproducing extremely high sound pressure levels with no fear of the overload and distortion often experienced with phantom powered condensers. The RE20 will also continue to function flawlessly in high humidity and elevated temperatures that would seriously degrade competitive condenser microphones.
