null

Ashly NX8002

Ashly

BSW PART:
NX8002

Power Amplifier 2 x 800 Watts at 2 Ohms

$2,149.00 $2,699.00
You save $550.00

NX Multi-Mode Power Amplifiers are designed to meet the most demanding live sound environments and fixed audio installations anywhere―performance venues, stadiums, arenas, convention centers as well as schools, store fronts, and worship spaces. Available as three separate amplifier series, NX offers 2 or 4-channel models as NX (base model series), NXE (networkable), or NXP (networkable + DSP).

$2,149.00 $2,699.00
You save $550.00

Free Shipping

Out of stock

Add to quote
Qualifies for free shipping
  • Main Features:
  • Selectable 80Hz Hipass filter, limiter, and input gain per channel, via rear panel
  • Remote DC level control per channel
  • Extensive protection circuitry, continuously variable cooling fans
  • Neutrik® Combo XLR – 1/4” TRS jack plus Euroblock input connectors
  • Neutrik® speakON® twist locking loudspeaker connectors for security, safety, and reliability
  • Neutrik® powerCON® detachable AC mains connector
  • Safety/Compliance: cTUVus, CE, FCC, RoHS
  • Specifications:
  • Voltage Gain: Selectable at 26dB, 32dB, 38dB, or 1.4V
  • Damping Factor: >250 (8 Ohms load <1kHz)
  • Input High Pass Filter: 80Hz 2nd order
  • Distortion (SMPTE, typical): <0.5%
  • Distortion (THD-N, typical): <0.5% (8 Ohms, 10dB below rated power, 20Hz–20kHz)
  • Channel Separation: -75dB (dB from full output, 1kHz)
  • Signal to Noise (20Hz–20kHz, unweighted):
  • >114dB (all 3.0x models)
  • >111dB (all 1.5x models)
  • >108dB (all 800x models)
  • >105dB (all 400x models)
  • Frequency Response: 20Hz–20kHz, +/-0.05dB
  • Balanced Input Connector: Euroblock 3.5mm, 1/4” TRS and XLR Combo jack
  • Input Impedance: 10k Ohms
  • Maximum Input Level: +21dBu
  • Speaker Output Connector: Neutrik® speakON®
  • Remote DC Level Control: Euroblock 3.5mm - Gnd, CV, V+ per input
  • Attenuators (per channel): Front panel and remote. Fully off = Mute
  • Amplifier Protection: Inrush current limitation, temperature monitoring, output over-power protection, mains fuses
  • Airflow: In through sides, Out through front
  • Cooling: Continuously variable temperature controlled axial fan(s)
  • Environmental: 32–113 deg F, (0–45 deg, C) (noncondensing)
  • Weights and Dimensions:
  • Unit Weight: 1.54/3.04: 28lbs (12.7kg), 1.52/3.02: 22lbs (10kg), 4002/8002: 21.5lbs (9.75kg), 4004/8004: 25.2lbs (11.4kg)
  • Shipping Weight: 1.54/3.04: 34lbs (15.5kg), 1.52/3.02: 28lbs (12.8kg), 4002/8002: 27.6lbs (12.5kg), 4004/8004: 31.3lbs (14.2kg)
  • Unit Dimensions (all models): 19”W x 3.5”H x 16.84”D (483mm x 89mm x 428mm)
  • Shipping Dimensions: 24.5"W x 22"H x 5.25"D (622mm x 559mm x 133mm)
  • Front Panel LED Indicators:
  • POWER (white): Switch: On, Off, Standby (flashing)
  • PROTECT (red): On (fault condition or shut down), Off
  • SLEEP (blue): On, amplifier is asleep from audio inactivity
  • DISABLE (yellow): On, power switch & front panel attenuators are disabled
  • COM (green): On, for Ethernet data or Device ID
  • Per Channel:
  • CLIP/MUTE (red): Clip @ 1dB below full output / Mute
  • SIGNAL (green): -18dB below rated output
  • CURRENT (green): Proportional to output
  • TEMP (yellow): On dim at 90% max operating temperature, full bright + protect at 100%
  • BRIDGE (green): On, Off