- Main Features:
- Complete Range of Input Channels
- 1-knob Compressor
- Comprehensive, Professional Effects and Signal Processing
- High Efficiency Class-D Amplifier
- Rack Mountable
- Specifications:
- I/O:
- Inputs: TOTAL 12 channels : 8 Mono (MIC/LINE), 4 Stereo (LINE)
- Phantom power: +48 V
- Outputs: SPEAKERS [A, B], AUX1 SEND, AUX2 SEND, STEREO OUT [L, R], REC OUT [L, R]
- Control and others: FOOT SWITCH : Effect Mute on/off
- Bus: Stereo: 1, AUX: 2 (Including FX)
- Input Channel Function:
- PAD: 30 dB (CH1-4)
- Hi-Z: Supported (CH4)
- HPF: 80 Hz, -12 dB/oct. (CH1–3)
- COMP: 1-knob COMP (CH1–4)
- EQ HIGH: 10 kHz +15 dB / -15 dB (Shelving)
- EQ MID: 2.5 kHz +15 dB / -15 dB (Peaking)
- EQ LOW: 100 Hz +15 dB / -15 dB (Shelving)
- On-board processors:
- DSP: SPX Algorithm 24 programs, Feedback suppressor, Master EQ, Monitor EQ
- On-board amplifiers:
- Maximum output power @4ohms: 1kHz THD+N less than 10% (CEA2006) : 630 W + 630 W, 1kHz THD+N less than 1% (CEA2006) : 500 W + 500 W
- Maximum output power @8ohms: 1kHz THD+N less than 10% (CEA2006) : 460 W + 460 W, 1kHz THD+N less than 1% (CEA2006) : 370 W + 370 W
- Level Meter: 2 × 7 points LED meter (-20, -10, -6, 0, +6, +10, PEAK)
- Frequency response: Input to SPEAKERS : +1 dB/-3 dB (40 Hz to 20 kHz), Input to STEREO OUT, AUX1 SEND, AUX2 SEND : +0.5 dB/-1 dB (20 Hz to 20 kHz) , refer to the nominal output level @ 1 kHz
- Total harmonic distortion: Input to SPEAKERS: 0.1% @ 10 W (40 Hz to 20 kHz), 0.05% @ 50 W (1 kHz) ; Input to STEREO OUT, AUX1 SEND, AUX2 SEND: 0.03% @ +14 dBu (20 Hz to 20 kHz), 0.007% @ +20 dBu (1 kHz), (THD+N, measured with 22 kHz LPF)
- Hum & noise level:
- Equivalent input noise: -117 dBu (Noise is measured with A-weighting filter)
- Residual output noise: Input to SPEAKERS : -70 dBu(40Hz to 20kHz, STEREO MASTER LEVEL: min); Input to STEREO OUT, AUX1 SEND, AUX2 SEND : -82dBu(20Hz to 20kHz, STEREO MASTER LEVEL: min) (Noise is measured with A-weighting filter)
- Crosstalk: -85 dB (1 kHz, Measured with 1 kHz band pass filter)
- Protection circuit:
- Load protection: DC-fault
- Amplifier protection: Over heat protection, Over current protection, Integral power protection
- Power supply protection: Over heat protection, Over current protection
- Power requirements: AC 100-240V, 50Hz/60Hz
- Power consumption: 42 W (Idle) / 210 W (1/8 Power)
- Dimensions:
- W: 465 mm (18 5/16")
- H: 308 mm (12 1/8")
- D: 325 mm (12 13/16")
- Net weight: 9.5 kg (20.9 lbs)
- Accessories: Owner’s Manual, Technical Specifications, AC power cord (2.5 m)
- Options: Foot switch: FC5, Rack-mount brackets: RK-EMX7
- Others: Operating Temperature : 0 to +40?
