null

Tascam MM-4D-IN-X

Tascam

BSW PART:
MM-4D-IN-X

4 MIC/LINE INPUT DANTE CONVERTER w/DSP XLR

$799.00 $949.00
You save $150.00

The MM-4D/IN-X is a compact converter that converts 4-channel mic/line input signals into Dante signals. With half the size of a standard 1U rack, the MM-4D/IN-X is suitable for different Dante systems as an exquisite analog output unit. The built-in DSP mixer enables small scale systems to fully perform with a variety of input/output models the TASCAM Dante Compact Processor Series offers. MM-4D/IN-X supports up to 96kHz/24bit and uses XLR connectors for analog mic/line input.

The MM-4D/IN-X converts 4-channel mic/line input signals into 4-channel Dante output signals. It also supports 4-channel Dante input/output making it possible to use audio sources within an established Dante network.

The installed mic preamps support phantom power (+48V) and the input gain can be remote controlled via TASCAM DCP CONNECT software, via Dante or other external controllers.

The MM-4D/IN-X has installed two natural-sounding, high grade TASCAM mic preamps made with all the knowledge and experience cultivated through the years in the making of pro audio equipment. Input range covers from -70 dBu to +26 dBu, with equivalent input noise achieving less than -125 dB, and signal-noise ratio over 108 dB.

They can be finely adjusted depending on the mic/line equipment used.

Using the built-in matrix mixer, users can mix up to 8 different sources (4-channel mic/line inputs with 4-channel Dante inputs) and configure the settings on each of the four output zones. The matrix mixer is also equipped with a ducking function and an ambient noise compensator function, which detects the level of environmental sounds and automatically adjusts the input level of the source.

Flexible routing allows users to choose the output zone of 4 mic/line inputs or the built-in matrix mixer output zone as 4 Dante output. The MM-4D/IN-X can also be used as a simple mic/line input unit by bypassing the matrix mixer.

Power supply can be provided to the unit via PoE (Power over Ethernet). No need for AC adaptors; power supply construction fees and installation costs can be reduced by using a PoE compatible network switch.

Controlling effects or the matrix mixer can be easily done through the dedicated control software; depending on the amount of controls the user needs, there are two types:

-TASCAM DCP CONNECT, designed for system integrators/managers that handle the configuration and settings of an entire system.
-TASCAM EZ CONNECT, designed for end-users and allowing them to use simple controls. Compatible with Windows / macOS / Android / iOS devices.

$799.00 $949.00
You save $150.00

Out of stock

Add to quote

  • Main Features:
  • 4-channel mic/line input with phantom power (+48v) support (XLR)
  • Supports remote mic gain control
  • 4 Dante input/output
  • Supports PoE (Power over Ethernet)
  • Up to 24bit/96kHz
  • Includes a variety of DSP functions for optimal use in different scenes/environments (Output effects, 8 in/4 out matrix mixer)
  • Supports Dante daisy chain; this allows two Dante Compact Processor models to be connected without a network switch
  • Flexible scene preset function allows to work in different area situations (Up to 50 presets)
  • 2 types of user control software available for Windows/Mac/iOS/Android devices:
  • For full control: input/output routing selection, DSP/design/scene settings of the complete system, etc.
  • For simple control: simple app design for only the necessary functions such as area volume settings, etc.
  • Remote control via Dante
  • Half-rack mountable size
  • Equipped with indicators that show LAN/Dante connection status and sample rate
  • Equipped with signal indicators that monitor line input signals
  • Configurable reference level (via remote control only)
  • Surface rack mountable angles for installation under desks included
  • Optional accessories:
    -AC adapter PS-P1220E for redundant power supply available
    -Rack-mountable shelf AK-RS1 to install and store two Dante Compact Processor models in a 19 inch rack case
  • Specifications:
  • Formats and channels: 44.1/48/88.2/96kHz,16/24-bit, 4 channels
  • DATA/DATA+PoE connectors:
    -Connector: RJ-45
    -Transmission protocol: Dante
    -Gigabit Ethernet standard: 1000BASE-T (IEEE 802.3ab)
    -Cables: category 5e or faster STP cables
  • ANALOG IN connectors:
    -Connector: XLR-3-31 (1: GND, 2: HOT, 3: COLD)
    -Minimun input level: -70 dBu
    -Maximum input level: +26 dBu
    -Input impedance: 2.0 kΩ or higher
  • Power: PoE class 0, TASCAM PS-P1220E AC adapter (sold separately)
  • Power consumption: 7.5W
  • Dimensions: 214 x 44.45 x 136.1 mm (W x H x D, including protrusions)
  • Weight: 885 g
  • Operating temperature range: 0°C-40°C
  • MIC IN → DANTE OUT :
    -Mic amp EIN (equivalent input noise): -125 dBu (150Ω, 22kHz LPF+A, JEITA) -Frequency response:
     +/-0.5 dB: 20 Hz - 20 kHz(44.1/48kHz sampling frequency, JEITA)
     +/-0.5 dB: 20 Hz - 40 kHz(88.2/96kHz sampling frequency, JEITA)
    -Distortion (THD+N): 0.003 %(when -1 dBFS input, 44.1/48/88.2/96kHz samplingfrequency, JEITA)
    -S/N ratio: 108 dB (44.1/48/88.2/96kHz sampling frequency, JEITA)
    -Crosstalk: 100 dB (44.1/48/88.2/96kHz sampling frequency, JEITA)
    -Dynamic range: 108 dB (44.1/48/88.2/96kHz sampling frequency, JEITA)