- Main Features:
- Compatible with the 833, 888, and the Scorpio.
- Accepts two UniSlot or SuperSlot wireless receivers from Audio Ltd, Lectrosonics, Sennheiser, and Wisycom.
- Built-in antenna distribution with antenna powering for active antennas or boosters.
- Supports remote control of third party smart antennas.
- Two auxiliary MCX antenna ports for connecting other receivers or RF distribution.
- Two TA3 AES3 inputs for an additional 4 channels of digital audio.
- Two DC Outputs via Hirose 4-pin connectors, each supplying up to 500 mA.
- Powers via an 8-Series mixer-recorder.
- Accepts either analog or digital audio from slot-in receivers.
- Ability to set and monitor multiple functions of a SuperSlot-compatible receiver from the 8-Series mixer-recorder.
- RF Scan with visual representation of the RF spectrum.
- Monitor transmitter battery, receiver audio, and RF levels.
- Rugged, lightweight, and compact design.
- Mounts to the top of any 8-Series mixer-recorder.
- Same width as the 833.
- Specifications:
- Powering: All power supplied by host 8-series machine
- Antenna Impedance: 50 ohms
- Antenna Powering:
- 12V at 200 mA, menu selectable on/off
- Serial remote control, Wisycom-compatible for ADFA and LFA powered antenna etc.
- Antenna Pre-select Filters:
- Menu selectable:
- Wideband/bypass (low pass filter, 1.7 GHz upper cut-off)
- 470-614 MHz
- 542-694 MHz
- 606-770 MHz
- 770-960 MHz
- Input RF Attenuators: 0 to -1 8dB, in 6 dB steps, menu selectable
- RF Outputs: Auxiliary Antenna Outputs for additional receiver
- DC Outputs: 1-2: 500 mA max (each), 6-18 VDC passed through from host 8-series machine, depending on power source. Hirose 4-pin connector: pin 4 = +, pin 1 = ground.
- Aes Inputs: Two pairs for a total of four channels, AES-3 balanced, 110 ohms, TA-3 connectors Dimensions:
- H x W x D:
- 4.5 cm x 21.3 cm x 13.1 cm
- (1.8 in x 8.4 in 5.1 in) Weight:
- 1.35 lbs (unpackaged)
- 0.61 kg (unpackaged)