null

FREE SHIPPING ON ORDERS $100 OR MORE *

* Restrictions apply, click here to view our shipping policy

Sony C80

BSW PART:
C80

Uni-directional Condenser Microphone

$569.99

Uni-directional condenser microphone suitable for vocal/voice recording. Inheriting the microphone capsule used in the C-100 and using the same material as the C-800G for the diaphragm, this microphone inherits the essence of the predecessors. The dual diaphragm configuration suppresses sound characteristics changes with distance (proximity effect), enabling stable recording/distribution. “Noise Elimination Construction” succeeded from C-800G/C-100 prevents acoustic vibration resulting in low noise and clear sound.

$569.99

Out of stock

Add to quote

  • Main Features:
  • Excellent Sound Quality
    - A powerful and rich mid-low frequency range provides vocals and voice recordings with a core sound and presence.
  • Dual Diaphragm Configuration
    - The dual diaphragm configuration realizes stable recording/distribution by suppressing sound characteristic changes with distance (proximity effect).
  • Noise Elimination Construction
    - The two-part metallic body structure succeeded from the C-800G/C-100 microphone prevents acoustic vibration, resulting in low noise and clear sound.
  • Low-Cut Filter
    - The low-Cut filter switch helps eliminate the low-frequency noise and proximity effect.
  • Pad Switch
    - An -10dB pad switch on the microphone provides added headroom and minimizes distortion caused by transient peaks.
  • Specifications:
  • Audio Section
    - Capsule Type: Condenser Microphone
    - Frequency Response: 20Hz~20kHz
    - Directivity: Uni-directional
  • Sensitivity
    - -30 dB
    - (deviation ±3 dB)
    - (0 dB=1 V/Pa, 1 kHz)
  • Output Impedance
    - 90Ω±15%, Balanced
  • Dynamic Range
    - More than 125.5 dB
  • Signal-to-Noise Ratio
    - 81.5dB
  • Inherent Noise
    - Less than 12.5 dB SPL
    - (0 dB=2 × 10-5 Pa)
    - (IEC 61672-1 A-Weighted, 1 kHz, 1 Pa)
  • Maximum Input Sound Pressure Level
    - More than 138 dB SPL
    - (output level for 1% waveform distortion at 1 kHz, converted into equivalent input sound pressure level: 0 dB=2 × 10-5 Pa)
  • General
    - Connector: XLR-3-12C (male)
    - Mic Cable: XLR 3-pin Cable Required (Not Supplied)
    - Power Requirements: DC 44 to 52 V
    - Dimensions: Approx. 40 mm (1.57 in.) dia. × 158 mm (6.22 in.)
    - Mass: Approx. 215 g (7.6 oz)
  • Supplied Accessories
    - Cradle suspension (1)
    - Operating instructions (1)
    - Carrying case (1)