null

FREE SHIPPING on online orders over $99

Shure GLXD14+ PGA31-Z3

Shure

BSW PART:
GLXD14PLUS-PGA31-Z3

GLXD14+ HEADSET SYSTEM W/PGA31

$559.00 $699.00
You save $140.00

GLX-D+ Dual Band Digital Wireless is the perfect solution for musicians and presenters who want to go wireless with confidence, and without complexity. Every aspect of its operation is managed automatically and with total reliability, allowing you to focus on your performance. With new Dual Band Wireless Technology, GLX-D+ can operate in both 2.4 and 5.8GHz, more than doubling the available bandwidth while also intelligently avoiding interference for reliable, dropout-free audio. Featuring smart rechargeability with up to 12 hours of runtime (improved from prior generation GLX-D), the included lithium-ion battery can be charged multiple ways and offers quick charge capabilities. Available with multiple legendary microphone options (including the SM58®) in tabletop, half-rack and guitar pedal system configurations. When combined with Frequency Manager and directional antenna accessories (both sold separately), the rack-mount receiver systems are ideal for small and medium installations where a larger number of channels is needed.

$559.00 $699.00
You save $140.00

Free Shipping

Out of stock

Add to quote
Qualifies for free shipping
  • Specifications:
  • GLXD4+ DUAL BAND WIRELESS RECEIVER:
  • Dimensions: 7.2 x 4.8 x 1.6 in. (182.8 x 121.97 x 40.3 mm), H x W xD, antennas folded
  • Weight: 10.9 oz (310 g)
  • Housing: Molded Plastic
  • Power Requirements: 14.5 V - 17 V, 600mA
  • Spurious Rejection: >35 dB, typical
  • Gain Adjustment Range: -20 to 40 dB in 1 dB steps
  • Phantom Power Protection: Yes
  • Configuration:
  • XLR Output: Impedance balanced
  • 6.35 mm (1/4“) output: Impedance balanced
  • Impedance:
  • XLR Output: 100 Ω
  • 6.35 mm (1/4“) output: 100 Ω (50 Ω, Unbalanced)
  • Maximum Audio Output Level:
  • XLR connector (into 600 Ω load): 1 dBV
  • 6.35 mm (1/4“) connector (into 3 kΩ load): +8.5 dBV
  • Pin Assignments:
  • XLR Output: 1=ground, 2=hot, 3=cold
  • 6.35 mm (1/4“) connector: Tip=audio, Ring/Sleeve=ground
  • RECEIVER ANTENNA INPUT:
  • Impedance: 50 Ω
  • Antenna Type: Dual Band 1/2 Wave Sleeve Dipole, non-removable
  • Maximum Input Level: −20 dBm
  • GLXD1+ DUAL BAND BODYPACK TRANSMITTER:
  • Dimensions: 4.5 x 2.6 x 1.1 in. (115 x 66.94 x 28.51 mm), (H x W x D), without antenna
  • Weight: 5.4 oz (153.1 g), without battery
  • Power Requirements: 3.7 V Rechargeable Li-Ion
  • Housing: Cast Metal, Black Powdercoat
  • Input Impedance: 900 kΩ
  • RF Output Power: 10 mW E.I.R.P. max
  • TRANSMITTER INPUT:
  • Connector: 4-Pin male mini connector (TA4M)
  • Configuration: Unbalanced
  • Maximum Input Level (1 kHz at 1% THD): +8.4 dBV (7.5 Vp-p)
  • Antenna Type: Dual Band Internal Monopole
  • Pin Assignments TA4M: 1: Ground (cable shield), 2: + 5 V Bias, 3: Audio, 4: Tied through active load to ground (On instrument adapter cable, pin 4 floats)
  • PGA31 Specifications:
  • Type: Electret Condenser
  • Frequency Response: 60 to 20,000 Hz
  • Polar Pattern: Unidirectional (Cardioid)
  • Output Impedance @ 1 kHz, typical: 600 Ω
  • Audio Output Level: -50 dBV/Pa
  • Signal-To-Noise Ratio[1] @ 1 kHz: 66 dB
  • Maximum SPL[1] 1000 Ω load, @ 3% THD: 145.0 dB
  • Dynamic Range[1] @ 1 kHz, 1000 Ω load: 117.0 dB
  • Equivalent Output Noise[1] Typical, A-Weighted: 28 dB
  • Power Requirements: +5 V DC (nominal), 10 V maximum (DC bias)
  • Polarity: Positive pressure on diaphragm produces positive voltage on pin 3 with respect to pin 1
  • Cable: 1.3 m (50 in.)
  • Connector: TA4F
  • Net Weight: 45 g (1.59 oz.)