- Main Features:
- Supports up to 40 OMNEO or ROAMEO belt packs and up to 16 party lines. Ethernet connectivity through copper or fiber connections available.
- Supports 4 ports of analog AIO 4-wire and 4 ports of analog 2-Wire (RTS / Audiocom / Clear-Com formats supported). Auto nulling capability (echo cancellation) available on 2-Wire interfaces.
- Supports up to 8 keypanels (any mix of analog/OMNEO/RVON) depending upon product licensing. (Maximum 4 analog)
- Up to 4 RVON channels available with the Advanced license for remote networking with other RVON capable equipment. G.711, G.729ab and G.722 codecs supported.
- Includes stage announce output and additional OMNEO expansion audio ports reserved for connecting and networking with other OMS units. These expansion ports allow additional system capacity and partyline capability as part of a distributed system.
- Specifications:
- Power Supply
- Type: Locking IEC 320 C14 style connector
- AC Input: 100 VAC – 240 VAC, 60/50 Hz, 0.46 A / 0.24 A
- Maximum Power Consumption: 30 W (based on 120 VAC)
- Environmental
- Operating Temperature: 32° F – 113° F (0° C – 45° C)
- Storage Temperature: -4° F – 158° F (-20° C – 70° C)
- Dimensions
- 19" w/ rack ears (17.56" w/o rack ears) W x 1.7" H x 7.72" D (including connectors)
- (482.6 mm w/ rack ears [446.1 mm w/o rack ears] W x 43.7 mm H x 196.1 mm D [including connectors])
- Weight
- OMS chassis: 5.29 lbs (2.4 kg)
- AIO 4-Wire Analog
- Connectors: 4 RJ-45 connectors
- Signal Format: Differential RX/TX audio with differential RS-485 control data
- Wiring Scheme: Both 568B & USOC supported
- A/D and D/A Resolution: 24 bits
- Max Input Level (balanced): +20 dBu w/o clipping
- Digital Input Gain: Programmable (-20 dB – +20 dB)
- Input Frequency Response: +1 dB/-3 dB from 100 Hz – +20 kHz
- THD+N (8dBu input, unity gain:)
- - 0.025% non-weighted@1 kHz
- - <0.075% non-weighted, 100 Hz – +20 kHz
- Nominal Input Impedance: >22 kΩ
- Nominal Output Level: 8 dBu
- Digital Output Gain: Programmable (-20 dB – +20 dB)
- Maximum Output Level (balanced): 20 dBu w/o clipping
- Output Frequency Response: +1 dB / -3 dB from 100 Hz – +20 kHz
- Output Noise Floor: <-65 dBu
- Crosstalk Isolation: >80 dB
- PGM1 & PGM2: 3-pin XLR-F
- Signal Format: Differential RX/TX audio
- A/D Resolution: 24 bits
- Max Input Level (balanced): +20 dBu w/o clipping
- Digital Input Gain: Programmable (-20 dB – +20 dB)
- Input Frequency Response: +1 dB/-3 dB from 100 Hz – +20 kHz
- THD+N (8dBu input, unity gain):
- - 0.025% non-weighted@1 kHz
- - <0.075% non-weighted, 100 Hz – +20 kHz
- Nominal Input Impedance: >22 kΩ
- Nominal Output Level: 8 dBu
- Digital Output Gain: Programmable (-20 dB – +20 dB)
- SA (Stage Announce): 3-pin XLR-M
- Signal Format: Differential RX/TX audio
- D/A Resolution: 24 bits
- Max Input Level (balanced): +20 dBu w/o clipping
- Digital Input Gain: Programmable (-20 dB – +20 dB)
- Maximum Output Level (balanced): 20 dBu w/o clipping
- Output Frequency Response: +1 dB / -3 dB from 100 Hz – +20 kHz
- Output Noise Floor: <-65 dBu
- Crosstalk Isolation: >80 dB
- 2-Wire Party Line Analog
- Connector: four 3-pin female XLR connectors
- Modes/Port supported:
- - RTS CH1, RTS CH2
- - Audiocom (4 channel)
- - Clear-Com (4 channel)
- 4W/2W Echo Return Loss: >45 dB
- Unbalanced Operation (RTS/Clear-Com)
- Expected Termination Impedance: 200 Ω
- Noise Contribution: <-70 dBu
- THD+N (w/ nominal input): <0.5%, 200 Hz – 7.3 kHz
- Bridging Impedance: >10 kΩ
- CALL Signaling:
- - 20 kHz (RTS mode)
- - 12 VDC (Clear-Com mode)
- MIC KILL Signaling: 24 kHz (RTS mode)
- Balanced Operation (Audiocom)
- Expected Termination Impedance: 300 Ω
- Noise Contribution: <-70 dBu
- THD+N (with nominal input): <0.5%, 200 Hz – 7.3 kHz
- Bridging Impedance: >10 kΩ
- CALL Signaling: 20 kHz (Audiocom mode)
- MIC KILL Signaling: 24 kHz (Audiocom mode)
- General Purpose Input/Output Ports
- Relays (4 Relays):
- Type: SPDT
- Contacts:
- - Common (C)
- - Normally Closed (NC)
- - Normally Open (NO)
- Contact Rating: 1A @ 30 VDC
- Inputs (4 Inputs):
- Type: Optically Coupled
- Input Voltage: 5 VDC – 12 VDC on A+
- Note: A+ is internally pulled to +5 VDC. Connect Kto chassis ground to activate.
- Control Port:
- Connector: RJ-45
- Format: IEEE 802.3 compliant
- Speed: 10/100/1000 Mbps
- LEDs: Speed and Link/Activity
- OMNEO Port (primary and secondary)
- Maximum Capacity: 48 Full-duplex ports
- Copper Connector Type: RJ-45
- Format: IEEE 802.3 compliant
- Copper Ethernet Speed: 100/1000 Mbps
- LEDs: Speed and Link/Activity
- Fiber Connector Type:
- - Small Form
- - Factor Pluggable (SFP)
- Multimode:
- - Finisar FTLF8519P3BNL
- - 500m / 2.125Gbps
- Single Mode:
- - Finisar FTLF1421P1BTL
- - 15km / 2.67Gbps
- Fiber Speed: 100/1000Mbps
- LEDs: Speed and Link/Activity
- LED Indicator: Optical Signal Present
- Note: SFF-8472 fiber diagnostics supported