null

FREE SHIPPING on online orders over $99

Radio Design Labs FP-CH8

RDL

BSW PART:
FPCH8

Chime Module

$331.13 $441.50
You save $110.37

The FP-CH8 is an electronic chime generator that produces eight different synthesized chimes. Each chime can consist of up to 3 tones and 3 harmonics selected to produce sonically natural effects. Certain chimes are single tones and some are a sequence. Each of the 8 chimes is triggered by an individual external closure to ground. A momentary closure to ground is required to start a chime. A single additional CONT (continuous) terminal is also provided. Each chime plays once unless the CONT terminal is grounded. The continuous function causes a chime strike or sequence to repeat until the CONT terminal is ungrounded. This function causes tone chimes (Chimes 4 and 8) to be extended in duration until the CONT terminal is released. Background music or paging audio may be connected to the MUSIC IN input. When a chime plays, the music source will be quickly faded to a level set on the front-panel DUCKING trimmer. The ducking fade depth may be adjusted from 0 dB to fully off, allowing chimes to be mixed with the music or to interrupt the music. The front-panel CHIMING indicator illuminates while music is ducked and a chime is playing. WAIT and IGNORE terminals are provided to prevent or delay chiming action.

Chime patterns are: single strick, double strick, triple strick, tone ring, manual strick, decending triple strick, eurosiren and multi-tone alert.

PS24AS power supply not included.

$331.13 $441.50
You save $110.37

Free Shipping

Out of stock

Add to quote
Qualifies for free shipping
  • Main Features:
  • 8 Individually Selectable Electronic Chimes
  • Selectable Single or Repeated Chime
  • Synthesized Bell Harmonics for Natural Sound
  • External Chime Actuation
  • Input for Background Music or Paging Audio
  • Automatic Ducking
  • Specificaations:
  • Music Input: 50 kΩ balanced or unbal, +22 dBu max.
  • Frequency Response: 20 Hz to 50 kHz (+/- 0.5 dB)
  • THD+N: < 0.05% (unity gain, 50 Hz to 20 kHz)
  • Noise below +4 dBu: < -70 dB (unity gain)
  • Headroom: > 16 dB (above +4 dBu)
  • Gain: Unity to +22 dB (adjustable)
  • Ducking Fade Depth: 0 dB to fully off (adjustable)
  • Output: 150 Ω balanced, + 4 dBu or 75 Ω unbal.
  • Trigger Inputs (8): Trigger on high to low transition, 0.5 mA
  • Control Inputs (3): WAIT (play delay), IGNORE (no playback), CONT (continuous repeat)
  • Control Outputs (2): CHIMING (Open-collector low @ 25 mA),
  • EOC (low 100 mS at end of chime)
  • Power Requirement: GROUND-REFERENCED 24 Vdc @ 100 mA
  • Dimensions: Height:1.36 in. 3.46 cm Width: 3.25 in. 8.26 cm Length: 5.0 in. 12.7 cm
  • Ambient Operating Environment:0° C to 55° C