The ST-MX2 is used in any application requiring mixing of two audio sources. A mic may be mixed with a line-level music source. Two mics may be mixed to feed the mic or line level input of a power...

The RU-UDA4 distribution amplifier by RDL features dual 1x4 amplifiers; two channels, each with a single input to 4 outputs; inputs and outputs are unbalanced -10 dBv with RCA connectors; unity gain...

The FP-PA20A features a balanced line level input that may be connected unbalanced. A front panel gain control is designed to be adjusted either manually or with a trimming screwdriver. The gain...

The ST-RX2 has a single line-level audio input and two line-level audio outputs. In the absence of a control input, the NORMAL module output is fed from the audio input. When the TRIG control...

The ST-GLA1 is a self-gated line amplifier designed to be used in a variety of situations where it is desired to produce an automatically switched line-level signal with integral noise reduction...

The ST-RG1 is a digitally generated 0 to 10 volt Ramp Generator which provides the ideal interface for audio volume control from multiple points with the ST-VCA3. Any number of Up and Down buttons...

The FP-PA20 features a balanced line level input that may be connected unbalanced. A front panel gain control is designed to be adjusted either manually or with a trimming screwdriver. The gain range...

Easily mount your RDL Stick-On series audio/electrical units into one 19 rack mount system. Holds 10 stick-ons with velcro attachments and allows for uncomplicated cable harnessing. STR-19B mounts up...

The RDL TXJ2 is an unbalanced-to-balanced transformer with two unbalanced RCA inputs and one balanced screw terminal output.• Mix two unbalanced audio signals to mono balanced• Combine stereo into...

This indispensable device constantly adjusts for changes in input levels, bringing up low levels and reducing gain for high levels to continuously maintain the correct output of your system. It...

The FP-MX4 is a single-channel audio mixing module featuring four identical inputs. Each input accepts either a mic or line level source. The output section provides four mixing potentiometers...

The TX1A provides transformer isolation between balanced line and unbalanced input, and sports a level trim pot that adjusts output 4 to 24 dB below input level. Input may be 10 k ohms bridging or...