null

Orban Optimod 5750

ORBAN

BSW PART:
5750

FM and digital (DAB+/HD) Audio Processor

$6,100.00 $6,595.00
You save $495.00

OPTIMOD 5750 is the second of Orban’s new generation of audio processors and comes with all the features needed in a high-quality audio processor for FM and digital radio. It has a compact 1RU design, is equipped with a new high-resolution touch display, and controllable via any HTML5 web browser. OPTIMOD 5750 replaces its predecessor OPTIMOD 5700i and provides processing for FM analog and for DAB+, HD Radio and streaming. The FM and HD settings can be coupled to make the blend between analog and HD1 as smooth as possible in HD Radio. Alternatively, the FM and the digital processing can be adjusted independently. This is valuable when the digital processing drives a channel that does not require blending, such as an Internet stream.

$6,100.00 $6,595.00
You save $495.00

Free Shipping

In Stock

Add to quote
Qualifies for free shipping

  • Main Features:
  • Four Processing Structures: Five-Band, Low-Latency Five- Band, Ultra-Low-Latency Five-Band and Two-Band.
  • Window-Gated AGC: Intelligent two-band window-gated AGC controls levels subtly and unobtrusively.
  • RDS/RBDS: Onboard generator supports dynamic PS scrolling and IP access.
  • Factory Presets: OPTIMOD 5750 has numerous factory presets included in delivery; Orban’s exclusive “Less-More” control simplifies creating your own signature sound.
  • AES67/SMPTE ST-2110: Two redundant network interfaces are available for Audio-over-IP connections supporting AES67 and SMPTE ST-2110.
  • Remote Control/Monitoring: OPTIMOD 5750 can be configured and controlled via any HTML5 web browser. SNMP v2 is also supported. Ember+ will be added in a future release.
  • “True Peak” Limiter: The “True Peak” limiter in the digital processing path anticipates and controls peak levels following D/A conversion, a feature now required by many broadcasters.
  • ITU BS.412 Multiplex Power Control: The defeatable ITU BS.412 Multiplex Power Controller constrains MPX power smoothly and reliably, ensuring compliance in countries that regulate it.
  • ITU-R BS.1770-4 Loudness Control facilitates compliance with modern target loudness recommendations like EBU R128.
  • Diversity Delay: An adjustable delay can be inserted in the FM and/or digital path to ensure time-alignment of the FM and HD Radio/DAB+ signals at the receiver.
  • Silence Detection: A programmable silence detector is available for the analog, digital and AoIP inputs. It can generate alarms and allows automatic switching to a backup input/input audio storage.
  • Audience Measurement: Two internal watermarking encoders that support Nielsen Audio, Kantar, or IPSOS are optionally available, allowing the FM and the DAB+/HD Radio signals to be watermarked independently.
  • Specifications:
  • Streaming Monitor Output: Optionally, the processed FM or DAB+/HD Radio signals can be monitored remotely via IP, allowing processor adjustment in locations where a clean off-air signal is unavailable.
  • μMPX interface: The optional μMPX Interface allows you to transmit bandwidth-limited DMPX over IP.
  • APTmpX Interface: The optional APTmpX Interface allows you to transmit full bandwidth DMPX over IP.
  • Internal Storage for Audio Backup: An optional 2 GB Flash Memory provides two hours linear or twelve hours AAC, MP3 or OPUS encoded audio.
  • Internet Stream Decoder: This optional feature can be used as a backup audio source received via Audio-over-IP.
  • Dual Power Supplies: OPTIMOD 5750 is equipped with monitored dual-redundant power supplies to ensure 24/7 operation.
  • Safety Bypass Relays: The analog, digital AES3 and the composite audio inputs and outputs have defeatable safety bypass relays that operate in case of hardware or power failures. Audio Input Channels: • 1 x stereo analog • 2 x stereo digital AES3 • 2 x stereo AoIP
  • Audio Output Channels: • 1 x stereo analog • 2 x analog MPX/composite • 2 x stereo digital AES3 or 1 x stereo digital AES3 and 1 x DMPX (configurable) • 4 x stereo AoIP • 1 x headphone output (for monitoring) • Optional 1 x μMPX (DMPX over IP) • SCA Inputs: 2 x
  • Synchronisation: • 10 MHz clock input • AES11 sync input • 19 kHz pilot tone reference output • GPIOs: 8 x inputs, 2 x outputs
  • Latency: • 4 - 22 msec (depending on the processing structure) • Low-latency AES Output: 3 - 8 msec
  • IP Network: • 1 x RJ45 Ethernet Management • 2 x RJ45 Dual-redundant AoIP (AES67, SMPTE ST-2110, DANTE or RAVENNA)