null

FREE SHIPPING ON ORDERS $100 OR MORE *

* Restrictions apply, click here to view our shipping policy

Moseley SL9003QHP-2S

Moseley SL9003QHP-2S

Moseley

BSW PART:
SL9003QHP-2S

SL9003QHP-2SStarlink 2CH Digital STL System

More Moseley
MSRP: $ 19,080.00

Clear, digital audio...

…linear and uncompromising.

For decades, you’ve depended on the Moseley name for outstanding Studio-Transmitter Link performance. Now we’re proud to offer the Starlink SL9003QHP— the world’s first open-architecture, all-digital, multi-channel linear audio STL in exciting new HD Radio™ configurations.

Uncompromising Linear Audio
The SL9003QHP is a fully transparent link in your all-digital air chain, allowing the clarity of your audio to shine through. AES/EBU inputs and outputs combine with a built-in variable rate converter to offer seamless, compression-free connectivity. Front panel audio metering with RF and Modem diagnostics continually monitor the quality of your signal, assuring easy initial installation and maintenance.

Exceptional Spectral Efficiency
Utilizing spectrally efficient Quadrature Amplitude Modulation technology, the SL9003QHP can be configured to deliver linear audio channels, UDP for HD Radio™, plus RS-232 for remote control and RBDS over narrowbandwidth RF STL channels. User-selectable modulation rates of 16, 32, 64, and 128 QAM allow the end-user to maximize payload for RF channel allocations.

Intelligent Multiplexing
An optional digital multiplexer allows the SL9003QHP to convey additional UDP/LAN, compressed programs, FSK, as well as asynchronous and synchronous data channels in a variety of user-defined configurations.

Robust Performance
An optional digital multiplexer allows the SL9003QHP to convey additional UDP/LAN, compressed programs, FSK, as well as asynchronous and synchronous data channels in a variety of user-defined configurations.

Multi-Hop Systems With Starlink SL9003Q
STL paths over long distances or in difficult terrain can be accomplished using one or more Starlink repeaters. A Starlink repeater consists of a SL9003QHP receiver and transmitter in a single chassis. Repeaters can be configured with source decoders to create a drop-and-pass of the payload at the repeat site. In a Starlink repeater system, audio integrity is preserved throughout the system without decoding and re-encoding at each site.

Common Configurations:
Start from one of the four most-requested configurations to build your station’s ideal mix of audio/data channels:

SL9003QHP-2S provides one stereo pair with 44.1 kHz audio sampling at 16 QAM.

SL9003QHP-4S provides two stereo pairs with 32 kHz audio sampling at 32 QAM or 44.1 kHz sampling at 128 QAM.

SL9003QHP-2SLAN provides one 44.1 kHz stereo pair with RS-232 channels, plus 544 kbps simplex Ethernet data.

SL9003QHP-4SLAN provides two 32 kHz stereo pairs with RS-232 channels, plus 384 kbps of simplex Ethernet data.

HD Radio Ready Today
Starlink SL9003QHP meets all the requirements for IBOC digital radio. Starlink transports AES/EBU digital audio at all the approved sample rates along with simplex Ethernet data to provide all the signals necessary for the audio, multicasting, and data-casting services. With Starlink, stations can get the most out of HD Radio™ conversion now and in the future.

MSRP: $ 19,080.00

Out of stock

Add to quote

Contact BSW for your pricing and shipping!

  • Main Features:
  • Linear uncompressed audio
  • HD Radio™ Data Streams
  • 32, 44.1, or 48 kHz sample rates
  • Input AES/EBU Digital or Analog (L+R)
  • Output AES/EBU Digital and Analog (L+R)
  • Built in RS-232 data channels
  • User-Selectable 16, 32, 64, 128 QAM modulation
  • User-selectable 200-500 kHz channel bandwidth
  • Adaptive Equalizer
  • Powerful Reed-Solomon Error Correction
  • Low processing delay
  • Specifications:
  • System
    - Audio Capacity: 4 linear (32 kHz sample rate) + 2 data channels; or 4 linear (44.1 kHz sample rate)
    - Frequency Response: 0.5 Hz to 22.5 kHz (48 kHz sample rate), >0.5 Hz to 15 kHz (32 kHz sample rate)
    - Distortion: <0.01%
    - Data Coding Method: Selectable 32, 44.1, 48 kHz built-in rate converter
    - Dynamic Range: 90 dB static encoder/decoder
    - Time Delay: Linear 0 ms, ISO/MPEG 160-200 ms
    - Cross Talk: -80 dB
    - Bit Error Immunity: >10E-04 with no subjective loss in audio quality
    - Level Stability: >0.2 dB
  • Source Encoder
    - Audio Input Conversion: XLR Female
    - Audio Input Sample Rates: 32/44.1/48 kHz selectable, built-in rate converter
    - Analog Audio Inputs: Electronically balanced, 600/10k Ohm selectable, CMRR>60 dB
    - Analog Audio Levels: -10 dBu to +18 dBu, rear panel accessible
    - Digital Audio Inputs: AES/EBU or SPDIF selectable
    - AES/EBU Inputs: Transformer balanced, 110 Ohm input impedance
    - SPDIF Inputs: Unbalanced, 75 Ohm input impedance
    - Data Input Connectors: 9-pin D Male RS-232 levels
    - Data Input Rates: Async, 300-4800 bps selectable
    - Trunk Output Connector: 15-pin D Female
    - Trunk Output Rates: Uncompressed Linear (1.024, 1.4112 or 1.536 Mbps)
    - Trunk Output Types: Synchronous V.35 or RS-449
  • Source Decoder
    - Audio Output Conversion: XLR Male
    - Output Rates: Same as input
    - Analog Audio Outputs: Electronically balanced low/600 Ohm selectable
    - Analog Audio Levels: Levels same
    - Digital Audio Outputs: Outputs same
    - Output Connectors: Same
    - Input Connectors: Same
    - Input Types: Same
  • Intelligent Multiplexer
    - Capacity: 6 Local Ports, can multiplex 8 audio cards
    - Aggregate Rates: Up to 2.048 Mbps
    - Resolution: 8000 bps, 768-2048 kbps, 4000 bps, 384-768 kbps, 2000 bps, 192-384 kbps
    - Clocks: Internal, Derived, External Port
    - Interfaces: Choice of Low Speed Async Data (RS-232); High Speed Sync Data (V.35, RS-449)
    - Speeds: Low Speed 300-38400 bps; 16, 24, 32, 64 kbps
    - Trunk: V.35 or RS-449
    - Compression Options: MPEG2, MP3, AAC-LC&LD, and G.722/G.711 (consult factory)
  • Transmitter
    - Frequency: 215-235 MHz, 335-512 MHz, 960 MHz, 1350-1525 MHz, 1.7-2.2 GHz synthesized
    - Power Output/Threshold: +37 dBm standard, +34 dBm (1.7 GHz)
    - Step Size: 25 kHz
    - Occupied Bandwidth: 200/300/500 kHz, Rate/QAM mode dependent
    - Monitoring: Forward, Ref Power, Tx Lock, Radiate
  • Receiver
    - Frequency: 215-235 MHz, 335-512 MHz, 800-960 MHz, 1350-1525 MHz, 1.7-2.2 GHz synthesized
    - Power Output/Threshold: -93 dBm 16 QAM, BER 10-6; -90 dBm/64 QAM (10-6) 2 Channels
    - Step Size: 25 kHz
    - Occupied Bandwidth: 200/300/500 kHz, Rate/QAM mode dependent
    - Monitoring: RSL, BER, Rx Lock
  • Modulator
    - Frequency: 70 MHz
    - Modulation: User Selectable 16, 32, 64, 128 QAM
    - Error Correction: Reed-Solomon t=8
    - Equalizer: N/A
  • Demodulator
    - Frequency: 70 MHz
    - Modulation: Coherent 16, 32, 64, 128 QAM
    - Error Correction: Reed-Solomon t=8
    - Equalizer: 20 tap Adaptive