- Main Features:
- Robust 1gbps Network Performance
- Sync to multiple input sources for maximum resiliency
- Advanced Anti-Jamming, Anti-Spoofing Detection and Mitigation
- Internal oscillator (OCXO or RB) provides holdover up to +/- 500 nSec/24 hours
- Intelligent switching and monitoring
- Built in power redundancy
- Closed-source firmware architecture
- Configurable to meet DoD security requirements
- Legally traceable time server for compliance auditing
- Provides industry standard signals for IRIG, SMPTE, NENA, and other mission-critical groups
- 8 multicolor status LEDs
- Manufactured in house in the USA - TAA Compliant
- Specifications:
- Inputs/Reference Sources
- NTP
- RS232 (DB-9) / RS422 (5 Pos TB) and/or IP packet serial messages (NMEA 0183)
- GNSS Receiver (Single or Multi-constellation)
- Single L1 or Multiband L1, L2/L5 supporting GPS, GLONASS, GALILEO, BEIDOU, M-CODE GPS Receiver
- PTP/IEEE1588
- IRIG (DCLS/AM) and SMPTE Timecodes
- PPS (Sync In)
- 10 MHZ reference frequency
- Configurable input reference priority - Outputs
- NTP
- 10 MHZ Sinewave (BNC, 50 Ω,, low phase noise and phase locked to PPS out)
- 1 PPS (BNC, 50 Ω)
- RS232 (DB-9) /RS422 (5 Pos TB) and/or IP packet serial messages - NMEA 0183, NENA Format 0,1, or 8, Truetime-Kinemetrics
- Programmable relay closure - NO/NC dry contact relay
- Relay alerts loss of sync by default - Output Features
- Four configurable Masterport BNC outputs support:
- Time codes: IRIG (DCLS and AM) / SMPTE
- Audio/Video Sync: Genlock Black-Burst, Tri-Level Sync, Wordclock
- 10 MHz Square Wave (Phase locked with PPS)
- Additional PPS
- Programmable Pulse
- Programmable Reference Frequency
- Masterport outputs utilize BNC connectors and are software switchable - Network Features
- Three Independently Addressable isolated 1GigE Ethernet ports (Two RJ45 , one SFP)
- NTP Server: Synchronization of NTP and SNTP compatible clients
- NTP authentication: MD5, SHA-1, SHA-2
- PTP/IEEE 1588 Ordinary Clock or Grandmaster
- Synchronization of IEEE1588-2008 (PTPv2) compatible Clients - Security Features
- Advanced Anti-Jamming, Anti-Spoofing Detection and Mitigation
- Authenication on Dedicated Management Port(s)
- Encrypted Protected Admin and User Passwords and Access Levels
- Authenticated NTP - High-Stability Oscillator Options
- OCXO oscillator ±10 µsec / 24 hours
- Rubidium Oscillator +/- 500 nSec/24 hours - Management Features
- Dedicated isolated management nework port
- Additional USB managment port
- Firmware Upgradable
- Masterclock-provided WinDiscovery configuration and status monitoring utility.
- SSH CLI (Command Line Interface)
- Additional SNMP v1, v2, and v2c, v3 AES-256 monitoring (Traps) and logging with provided MIBs.
- Syslog client
- Easy to read, green 13-digit 7 segment LED display (Date/Time or Day of year/Time)
- Eight multicolor LEDs on the font panel indicate:
- Power Stability
- Holdover status
- Reference Lock Indicator
- Oscillator Calibration Stability
- Current Reference (GNSS, PTP, NTP, TimeCode) - Dimensions, Power, Operating Parameters
- Select between single or dual power supplies
- AC: 90-264VAC, 50/60Hz, IEC
- DC: 24VDC, 48VDC, or 110 VDC
- <20W Power Dissipation
- 16.92w x 1.77h x 7.53d in (42.972w x 4.5h x 19.13d) cm
- Temperature: 0 to +60°C (32 to +140°F)
- Humidity: up to 90%, non-condensing - Specifications:
- Inputs/Reference Sources
Base Model:
- NTP client with 10/100 Mb Ethernet (Dual-port)
- NMEA 0183 via RS-232 or RS-422/485
- NENA Format 0, 1 and 8 via RS-232 or RS-422/485
Additional Options:
- GPS and GNSS receiver options
- IEEE 1588v2 Precision Time Protocol
- Time Code Option: SMPTE 24fps (Film), 25fps (EBU), 30fps and 29.97 drop frame
- Time Code Option: IRIG-B0 (DCLS) and IRIG-B1 (AM)
- Time Code Option: IRIG-A0 (DCLS) and IRIG-A1 (AM)
- Time Code Option: IRIG-E0 (DCLS) and IRIG-E1 (AM)
- Internal high-stability OCX0 oscillator ±.25 seconds/yr
- Rubidium oscillator ±.25 mS/yr
- Synchronizing signals: PPS, PPM, PPH
- 10 MHZ Input (CMOS or Sinusoidal)
- Fiber optical LAN (1 or both ports) - Outputs
- Base Model:
- NTP client with 10/100 Mb Ethernet (Dual-port)
- NMEA 0183 via RS-232 or RS-422/485
- NENA Format 0, 1 and 8 via RS-232 or RS-422/485
- 5v at 100mA Pulse Per Second (PPS) - Outputs - Additional Options
- IEEE 1588v2 Precision Time Protocol
- Time Code Option: SMPTE 24fps (Film), 25fps (EBU), 30fps and 29.97 drop frame
- Time Code Option: IRIG-B0 (DCLS) and IRIG-B1 (AM)
- Time Code Option: IRIG-A0 (DCLS) and IRIG-A1 (AM)
- Time Code Option: IRIG-E0 (DCLS) and IRIG-E1 (AM)
- Time Code Option: HAVEQUICK & NASA36
- 5V at 100mA Programmable Pulse Output (PPO)
- 10 MHZ Output (Sinusoidal)
- 1MHz & 5MHz output (requires Rb "HSO-3" option) - High-Stability Oscillator Options
- Internal high-stability OCXO oscillator ±0.25 sec/year
- Rubidium oscillator ±1 ms/year - Dimensions, Power, Operating Parameters
- AC input (90-264VAC, 47-63Hz)
- 18.9w x 1.750h x 5.174d in (48w x 4.445h x 13.14d) cm
- Temperature: 0 to +60°C (32 to +140°F)
- Humidity: up to 90%, non-condensing - Other Options
- Optical Fiber LAN