null

Lectrosonics SMWB-E07-941

LECTROSON

BSW PART:
SMWB-E07-941

Digital Hybrid Wireless transmitters

$1,704.00 $2,412.00
You save $708.00

The SMWB and SMDWB transmitters offer hands free setup and adjustment using audible tones. They can be put to sleep to conserve battery power during setup while buried inside costuming, then awakened for normal operation when the production begins. Other features include input gain adjustment in 1 dB increments over a 44 dB range and adjustable low frequency audio roll-off for 3 dB down points at 35, 50, 70, 100, 120 or 150 Hz to control subsonic and very low frequency audio content. The transmitters also offer selectable output power of 25, 50 and 100 mW (10, 25 or 50 mW for E01).

The input section features the unique Lectrosonics servo bias input circuitry with a standard TA5M type jack for use with electret lavaliere mics, dynamic mics, or line level signals. A DSP-controlled analog audio limiter is employed ahead of the first mic preamp to protect the entire audio chain from overload. The limiter has a range of more than 30 dB for excellent overload protection, and a dual release envelope that makes the limiter acoustically transparent while maintaining low distortion of brief transients and longer duration peaks.

A water resistant control panel with LCD, membrane switches and multi-color LEDs make input gain adjustments, frequency and compatibility mode selection quick and accurate. The battery compartment accepts AA batteries (lithium recommended).

$1,704.00 $2,412.00
You save $708.00

Free Shipping

Out of stock

Add to quote
Qualifies for free shipping
  • Main Features:
  • Ultra-lightweight, corrosion resistant housing
  • Water resistant seals for use in damp environments
  • LCD interface with lockout option
  • Programmable compatibility modes for use with a wide variety of different receivers
  • Servo Bias input circuitry
  • IR (infrared) port for fast setup
  • Covers 2 frequency blocks (export versions cover 3 frequency blocks)
  • Update firmware in the field via Micro SD card reader
  • Alternate use as a recorder on an internal microSDHC memory card
  • Specifications:
  • Operating frequencies:
  • Band A1: 470.100 - 537.575
  • Band B1: 537.600 - 607.975
  • Channel Spacing: Selectable; 25 or 100 kHz
  • RF Power output: Switchable; 25, 50 or 100 mW
  • Compatibility Modes: Digital Hybrid Wireless® (NU Hbr), Mode 3, IFB
  • Pilot tone (Digital Hybrid Mode): 25 to 32 kHz; 5 kHz deviation
  • Frequency stability: ± 0.002%
  • Spurious radiation: Compliant with RSS 210 Annex G
  • Equivalent input noise: –125 dBV, A-weighted
  • Input level:
  • If set for dynamic mic: 0.5 mV to 50 mV before limiting; Greater than 1 V with limiting
  • If set for electret lavaliere mic: 1.7 uA to 170 uA before limiting Greater than 5000 uA (5 mA) with limiting
  • Line level input: 17 mV to 1.7 V before limiting Greater than 50 V with limiting
  • Input impedance:
  • Dynamic mic: 300 Ohms
  • Electret lavaliere: Input is virtual ground with servo adjusted constant current bias
  • Line level: 2.7 k ohms
  • Input limiter: Soft limiter, 30 dB range
  • Bias voltages: Fixed 5 V at up to 5 mA; selectable 2 V or 4 V servo bias for any electret lavaliere
  • Gain control range: 44 dB; panel mounted membrane switches
  • Modulation indicators: Dual bicolor LEDs indicate modulation –20, -10, 0, +10 dB referenced to full modulation
  • Controls: Control panel w/ LCD and 4 membrane switches
  • Low frequency roll-off: Adjustable from 35 to 150 Hz
  • Audio Frequency Response: 35 Hz to 20 kHz, +/-1 dB
  • Weight (w/ litium batteries):
  • SMWB: 2.7 oz.. (75.9 grams)
  • SMDWB: 3.7 oz.. (105 grams)
  • Overall Dimensions: (without microphone)
  • SMWB: 2.3 x 1.8 x 0.64 inches; 58 x 46 x 16 mm
  • SMDWB: 2.3 x 2.4 x 0.64 inches; 58 x 60 x 16 mm
  • Emission Designator: 180KF3E
  • Recorder
  • Storage media: microSDHC memory card
  • File format: .wav files (BWF)
  • A/D converter: 24-bit
  • Sampling rate: 44.1 kHz
  • Recording modes/Bit rate:
  • HD mono mode:
  • 24 bit - 144 kbytes/s
  • 32 bit - 192 kbytes/s
  • Split gain mode:
  • 24 bit - 288 kbytes/s
  • 32 bit - 384 kbytes/s
  • Input:
  • Type:
  • Analog mic/line level compatible; servo bias preamp for 2V and 4V lavaliere microphones
  • Input level:
  • Dynamic mic: 0.5 mV to 50 mV
  • Electret mic: Nominal 2 mV to 300 mV
  • Line level: 17 mV to 1.7 V
  • Input connector: TA5M 5-pin male
  • Audio Performance:
  • Frequency response: 20 Hz to 20 kHz; +0.5/-1.5 dB
  • Dynamic range: 110 dB (A), before limiting
  • Distortion: < 0.035%
  • Operating temperature range:
  • Celsius: -20 to 50
  • Fahrenheit: -5 to 122