Contact BSW for your pricing and shipping!
Purchase your high-quality Lectrosonics 400 Series wireless systems in ready-to-go packages, rather than a la carte. This ENGPACK-2 includes the new UCR401 portable/camera-mount receiver along with a plug-on transmitter for your handheld mic. A CCMINI carry case is also included to hold the receiver and transmitter. All systems available in various frequency blocks (for example Block 25: 640-665 MHz, Block 26: 665-691 MHz). Specify when ordering. This model is Block 26.
The UCR401 is a high-performance compact UHF wireless microphone receiver for mobile applications such as ENG and film production. The compact size and rugged attached antennas are ideal for video camera-mounted use. Unique DSP algorithms in the design provide full compatibility with all Lectrosonics 400 Series Digital Hybrid Wireless™ transmitters and variety of analog transmitters from Lectrosonics and some other manufacturers. Power is provided by two AA batteries, typically NiMH rechargeable types, or external DC supplied via a jack on the rear panel. Microprocessor control enables SmartSquelch™ and SmartDiversity™ advanced reception techniques to minimize noise and dropouts in all conditions. The receiver differentiates between close and distant operation and adjusts the squelch threshold automatically. In environments with significant RF reflections, the diversity switching activity optimizes the antenna combining based upon an analysis of RF level and audio content. Finding a clear operating channel is simplified with a choice of 256 frequencies across a 25.6 MHz bandwidth. A built-in RF spectrum analyzer scans the entire tuning range of the receiver and displays RF activity on the built-in LCD. Signal strength of other signals in the vicinity is indicated and empty sections of the spectrum are quickly identified with the graphical display.
HM Digital Hybrid UHF plug-on transmitter features 100 mW output power and a DSP-based design that allows the transmitter to operate in its native Digital Hybrid Wireless mode, Lectrosonics 200 Series, 100 Series, and IFB product groups, plus two modes for compatibility with analog receivers from other manufacturers. A unique multi-voltage phantom power feature allows the transmitter to be used with virtually any microphone, including high-current condenser types.
• Digital Hybrid Wireless Technology
• Membrane switch control panel with LCD display
• Converts microphones with XLR jacks to wireless operation
• Selectable 5-, 18- and 48-volt phantom power plus off position for dynamic microphones
• Adjustable low frequency roll-off
• Powered by two AA batteries
• 256 synthesized UHF frequencies
• 100 mW output power
• Rugged machined aluminum housing
Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device.
Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC’s wireless microphone website at www.fcc.gov/cgb/wirelessmicrophones
Contact BSW for your pricing and shipping!
Free Shipping
Out of stock