- Main Features:
- Four-channel, half-rack design
- Continuously tunable tracking filters covering 470.100 - 614.375 MHz
- Compatible with D2, DSW, Duet and Digital Hybrid Wireless® transmitters
- Built-in wideband antenna multicoupler with loop-thru for additional receivers
- Antenna bias power enabled from the front panel (fused and over-temperature protected)
- IR bi-directional port for transmitter setup
- Analog and Digital audio outputs with TalkBack (in applicable RX modes)
- Ethernet and USB interface
- Specifications:
- Operating Spectrum: 470.100 - 614.375 MHz
- Frequency Adjustment Range: 25 kHz steps
- Sampling Size and Rate: 24-bit, 48 kHz
- Digital Modulation: 8PSK with Forward Error Correction
- Data Encoding: Proprietary ADPCM
- Encryption: AES 256-CTR (per FIPS 197 and FIPS 140-2)
- System Latency:
- Digital Output:
- D2 mode: 0.75 ms plus Dante
- Duet mode: 1.4 ms plus Dante
- Hybrid modes: 2.0 ms plus Dante
- Analog Output:
- D2 mode: 1.25 ms
- Duet mode: 1.9 ms
- Hybrid modes: 2.5 ms
- Audio Performance:
- Frequency Response: 20 Hz - 20 KHz, +\-1 dB
- THD+N: 0.05% (1 KHz @ -10 dBFS)
- Dynamic Range: 108 dB A-wtd, NR=NORMAL
- Adjacent Channel Isolation: >85 dB
- Diversity Technique: Noiseless antenna switching
- Sensitivity: -98 dBm for 10-5 BER
- Antenna Inputs/Outputs: Dual BNC female, 50 ohm impedance
- Audio Outputs:
- XLR: Balanced, -35 to +8 dBu
- Headphone: 1/4 inch phone jack
- Dante model only: RJ45 Gigabit Ethernet
- AES3 model only: TA3M
- External DC Power: 7 to 18 VDC; 2.5A (max)
- Weight: 1.95 lbs.; 880 grams
- Dimensions:
- 8.375 x 1.75 x 7.375 in.
- 213 x 44.5 x 187 mm.
