null

FREE SHIPPING on online orders over $99

Furman M8S

Furman

BSW PART:
M8S
$369.95 $489.95
You save $120.00
Merit M-8S Power Sequencer is the perfect low-cost AC power solution for any rack mount system. Install an M-8S in your rack, and the eight outlets in the rear panel will power up in sequence and protect all your equipment up to a 15-amp load.

Main Features
• Standard level AC protection and filtering.
• Six sequenced rear panel outlets (in 3 groups), two unswitched rear panel outlets, and one front panel unswitched outlet.
• Momentary and Maintained sequencing via rear panel terminal block or front panel switch (momentary only).
• All settings and configurations available on rear panel.
• 15 amp rating.
• Three year limited warranty.

Specifications
• Maximum Output Current: 15 amps, 120 VAC (Thermal breaker)
• Line Cord: 14AWGx3, 10 feet, black, fixed, NEMA 5-15P plug
• AC Receptacles:
• Convenience Outlet (Front Panel) 1 Un-switched NEMA 15-5R
• Rear Panel Outlets: 2 Un-switched NEMA 5-15R (1 duplex),
• 6 Sequenced NEMA 5-15R (3 duplexes, each controlled by separate relay)
• Standard level AC Surge Protection : Merit Class (sacrificial)
• Spike Protection Mode : Line to neutral, zero ground leakage
• Max Continuous Operating Voltage : 130V RMS
• Max Clamp Voltage : 500 Volts Peak
• Peak Impulse Current : 12,000 Amps
• Energy Rating (2 X 820μS) : 225 Joules
• AC Filtering : Standard level Pi LCR Filter
• Noise Attenuation : >26dB, 100 Khz to 1 MHz
• Operating Temperature Range : 5C (40F) to 40C (105F) degrees
• Humidity Range : <90% rH (Relative Humidity)
• Rocker Switch : Front panel, Sequence (ON, OFF)
• Thermal Circuit Breaker : Front panel, push to reset
• Front Panel Indicators : Delay 1, Delay 2, Delay 3, Power, Protection OK
• Rear Panel DIP Switches : 12V Mode On/Off, GND Mode On, Momentary/Maintained
• Potentiometer : Rear panel, time calibration fine tune delay adjust
• Remote Terminal : +5-30VDC In, 12VDC (12mA) Out
• Remote Terminal : Phoenix type 4-Pin Connector with Screw terminals; +12V, STAT, REM, GND (Class 2 Wiring)
• Dimensions : 19"L x 8.75"D x 1.75"H – ANSI 1RU
• Weight : 7 lbs.
• Power Consumption : 5 Watts
• Safety Agency : C/CSA/US
$369.95 $489.95
You save $120.00

Free Shipping

Out of stock

Add to quote
Qualifies for free shipping