null

Eventide BD600W+

Eventide

BSW PART:
BD600W-PLUS

Broadcast Profanity Delay with Wheatnet-IP Integration, USB

$4,499.00

The BD600W+ offers an unprecedented 80 seconds of the highest quality revenue and license-protecting delay — twice as much as other delays. You have the flexibility to customize the delay buffer length from four seconds to the full 80 seconds. Dump can be customized in 1/2 second increments up to 10 seconds. Each time the DUMP button is pressed, only one segment is deleted. For example, if a unit is set to the full 80 seconds of delay buffer, and is set up to provide 8-second dumps, you will have ten separate dump segments. Pushing the DUMP button the first time cuts out one 8-second segment. You still have 72 seconds of delay protection. If this is followed by more trash-talk, push the DUMP button again and you still have over a minute of delay protection.

The “sneeze” button momentarily “edits” audio entering the delay, allowing the host to sneeze, cough, or make a short comment without being heard on-air – and without dead air. Your station cannot afford to work without a net. With the BD600W+, you will never worry about running out of delay memory.

In addition to the fully integrated BD600W+, an optional factory-installed upgrade, or a W-Upgrade field upgrade kit (soldering required) is available from Eventide for BD600s manufactured in 2011 or later.

$4,499.00

Out of stock

Add to quote

  • Main Features:
  • Microprecision delay mode for HD synchronization
  • 80 seconds of delay protection
  • USB Remote Control
  • WheatNet-IP connectivity
  • “Panic” allows WAV file play back during delay rebuild
  • 24-bit AES/EBU digital I/O, with optional Wordclock sync
  • 24-bit analog XLR I/O
  • User-defined “dump” length segmentation
  • “Sneeze” button for momentary edit
  • RS-232 I/O
  • Network remote capabilities offer 16 assignable inputs and outputs
  • Specifications:
  • Analog Inputs:
  • Audio Input Connectors: XLR pin 2 hot, true differential balanced, +4 dBm nominal
  • Input Impedance: 20K ohms bridging
  • Full Scale Input Level: +26dBu
  • Dynamic Range: >104dB
  • THD+N: <0.003 @ 1kHz, -3dBFS
  • Crosstalk: <-100dB @ 20Hz to 20kHz, -1dBFS
  • Analog Outputs
  • Audio Output Connectors: XLR pin 2 hot, true differential balanced, +4 dBm nominal
  • Output Impedance: 20K ohms bridging
  • Full Scale Output Level: +65dBu
  • Dynamic Range: >108dB
  • THD+N: <0.003 @ 1kHz, -3dBFS in stable delay state
  • Crosstalk: <-100dB @ 20Hz to 20kHz, -1dBFS
  • SNR: >108dB
  • Recorded Signal Specs:
  • Frequency Response:
    -Live or Bypass: 20Hz-20kHz +- 0.1dB
    -HD Microprecision Delay mode 10Hz-19kHz +- 0.25dB
    -Broadcast Profanity Delay mode 10hZ-20kHz +- 0.1dB (while delay is chaning 10Hz-19kHz +- 1.5dB)
  • Profanity Delay Maximum Length: Can be set to 4, 6, 8, 12, 16, 20, 30, 40, 60, or 80 seconds
  • Micro Precision Fixed Delay: Can be set from .010 seconds to 9.999,999 seconds in microsecond steps
  • Remote Control Connectors and Interfaces:
  • Remote Control Inputs:
    -RS-232 control input and output
    -USB Remote Control
  • Basic Remote:
    -4 configurable inputs (closure to ground)
    -2 relay-isolated status outputs
  • Optional Extended Remote:
    -16 bi-polar opto-isolated inputs
    -16 open-collector outputs
    -RS-232 input and delayed output
  • Compact Flash Interface: Supports Type I and Type II Compact Flash cards for .WAV sample playback and software update
  • A/D and Digital Signal Characteristics:
  • Sample Rates: 48kHz, 44.1kHz, Word Clock, AES/EBU
  • Digital Inputs/: 2 Channels of 24-bit AES/EBU
  • Physical:
  • Dimensions:
    -Inches: 1.75h x 19w x 10.5d
    -CM: 4.5h x 48.3w x 26.7d
  • Weight: 9 pounds (4.1 Kg); Shipping weight 14 pounds (6.5 Kg)
  • Power: 40 watts, 100-240 VAC, 50/60Hz