-
BSW PART: DAC-1
Broadcast Tools DAC-1
Stereo Digital-to-Analog Audio ConverterThe DAC-1 is a professional quality 24-bit stereo digital-to-analog audio converter.The DAC-1 is equipped with a SPDT alarm relay, configured to close after a user defined time delay when either an...
$597.55 -
BSW PART: WVRC8PLUS
Broadcast Tools WVRC8 Plus
Web Enabled, Dial-up Eight Channel Site Remote Control SystemThe Broadcast Tools WVRC-8 Plus provides a cost-effective, one rack-unit solution allowing dial-up recordable voice response and web-enabled control and monitoring via a web browser and/or smart...
$1,965.55 -
BSW PART: 2X10-DA
Broadcast Tools 2X10-DA
Distribution AmplifierThe 2 x 10 DA stereo distribution amplifier is equipped with a stereo line level high Z input, which accepts a balanced or unbalanced source with ten active balanced low Z output amplifiers. Each...
$350.55 -
BSW PART: SS2.1MLR-TERM
Broadcast Tools SS2.1MLR-TERM
Audio Switcher / Router with Terminal ConnectorsThe SS 2.1 MLR/Term is a transparent two input, dual output switcher/router with mechanical latching relays and Terminal connectors.The SS 2.1 MLR/Term is perfect for all types of passive signal...
$350.55 -
BSW PART: SS2.1MLRBNC
Broadcast Tools SS2.1MLRBNC
Audio Switcher with BNC ConnectorsThe Broadcast Tools SS 2.1 MLR/BNC is a transparent, two input, dual output switcher/router with mechanical latching relays and BNC connectors that excels at all types of passive signal switching via...
$350.55 -
BSW PART: COP-2
Broadcast Tools COP-2
Connect ‘O Pad 2The COP-2 provides an effective way to connect and adjust the audio outputs on XDS, WW1 MAX, NON-Option B SFX, StarGuide II and Starguide III receivers.
$69.00 -
BSW PART: TEMPSENSOR
Broadcast Tools Temperature Sensor
Optional Temperature Sensor for WVRC-4, WVRC-8 or VAD-2+, TempSentinel, Site Sentinel 4Optional Temperature Sensor for WVRC-4, WVRC-8 or VAD-2+, TempSentinel, Site Sentinel 4
$103.55 -
BSW PART: RM-1
Broadcast Tools RM-1
Rack Mount for Two 1/2 Rack Units 8" DeepRack mount kit for two Broadcast Tools 1/2-rack units, 8" deep.*Rackmount only. Product units not included.
-
BSW PART: RA-1
Broadcast Tools RA-1
Rack Mount ShelfThe Broadcast Tools RA-1 (1-RU rack shelf) provides mounting for three tri-rack or two half-rack "Rack-Able" configured products. The RA-1 is pre-drilled for flush and recessed product mounting. The...
$103.55 -
BSW PART: SITESENTINEL4
Broadcast Tools Site Sentinel 4
Site Monitoring and Control SystemThe Site Sentinel® 4 is a robust, full-featured; web-enabled four channel remote control system. The system is equipped with four metering inputs (zero to 10 VDC), 4 optically-isolated status (logic)...
$588.05 -
BSW PART: ACS8.2PLUS
Broadcast Tools ACS8.2Plus
8X2 Stereo Audio Control, Euroblock ConnectorsThe ACS 8.2 Plus cleanly provides matrix audio switching of 8 stereo inputs to 2 stereo plus 2 mono outputs. You can assign any or all inputs to any or all outputs, with any input assigned to output...
$1,367.05 -
BSW PART: COA37XDS
Broadcast Tools COA-37XDS
Connect O Adapter, ABC XDS Starguide II/IIIHere's another problem solver from Broadcast Tools for the ABC XDS or StarGuide II/III satellite receiver! The Connect O' Adapter 37 XDS provides an effective way to convert the male DB-37 connector...
$103.55