FREE SHIPPING on online orders over $99

BSW Remote2Go Package 13



RemoteMix 2 w/ 2 HMD26-II Headsets and Waterproof Case

$1,849.00 $2,182.99
You save $333.99
REMOTE2GO-13 Includes:

• JK Audio RemoteMix 2 broadcast Field Mixer

• 2 - Sennheiser HMD26-II headsets, with installed connectors

• Gator GU-1813-06-WPDF Waterproof case

RemoteMix 2 is a two-channel field mixer / headphone amplifier built for the remote broadcast environment. More than just a field mixer, RemoteMix 2 provides a communications interface for remote broadcast, IFB, or a backup audio path. The integrated headphone amplifier provides sidetone to monitor all inputs plus an external feed. RemoteMix 2 features a phone line hybrid with keypad along with a wired notebook/cell phone headset interface. All sections are designed to work together, saving setup time and wiring in the field.

TV – RemoteMix 2 Combines a small front-end mixer with two powerful 1/4” headphone outputs. Send and receive interview audio while pulling IFB off the phone line, cell phone, or notebook.

Radio - RemoteMix 2 is perfect for live remotes. Use it as a front-end mixer for your POTS, ISDN, IP or smart phone codec. Use it as a phone line hybrid, calling in to your studio talk show hybrid.

$1,849.00 $2,182.99
You save $333.99

Free Shipping

Out of stock

Add to quote
Qualifies for free shipping
  • Jk Audio RemoteMix2 Main Features:
  • Two XLR mic jacks
  • Two 1/4” headphone jacks with individual level controls.
  • XLR Line Out
  • 3.5 mm Send and Receive jacks
  • LED VU Meter
  • Phone line hybrid with DTMF keypad
  • Wired phone headset interface (2.5 & 3.5 mm interfaces)
  • Dual 9 volt batteries
  • 100-240 VAC External AC Supply
  • Made in USA
  • The HMD 26-II-600-X3K1 applies to requirements of demanding broadcast applications for studio or outside productions. The headset is lightweight, provides extra soft ear cushions and headband paddings for outstanding wearing comfort even during long production days. The closed, supra-aural headphones are dimensioned for high maximum SPL and provide a good passive noise attenuation. They are equipped with the ActiveGard limiter which protects hearing from sudden volume peaks above 105 dB. It can be activated or deactivated. Headset is provided with a dynamic hyper-cardiod patterned microphone. The microphone features excellent acoustic performance, a reliable noise suppression and has a shock mounted capsule for absorbing structure born noise. The short flexible part of the boom guarantees right positioning of microphone. Headset is designed for use in loud environment. Following the modular concept cables, ear cushions and paddings can be replaced easily.
  • Main Features:
  • Lightweight with extra soft cushions for excellent wearing comfort
  • Accurate and linear sound reproduction for professional Radio and TV applications
  • Microphone provides audio transmission in broadcast quality
  • ActiveGard™ (on/off switch) for protected hearing
  • Reliable performance over long lifetime for safe investments
  • Swiveling ear cap for single sided listening
  • Microphone can be worn either on right or left hand side
  • Modular concept of different cables and cushions for highest flexibility
  • Specifications:
  • Transducer principle: dynamic, closed
  • Ear coupling: supra-aural
  • Frequency response :20 - 18,000 Hz
  • Impedance : 50 Ω mono / 100 Ω stereo / 600 Ω HMD 26-II-600
  • Characteristic SPL : 105 dB SPL at 1 kHz, 1 mW/ 107 dB SPL at 1 kHz, 1 V
  • Maximum SPL : ActiveGard™ switched on: 105 dB SPL at 1 kHz / ActiveGard™ switched off: 127 dB SPL at 1 kHz, 200 mW
  • Passive noise attenuation: approx. 18 dB
  • Distortion: < 0,5% at 1 kHz)
  • Contact pressure: approx. 3.9 N
  • Microphone Type : BMD 424
  • Transducer principle : dynamic, noise compensating, hyper cardioid • Frequency response : 40 - 16,000 Hz
  • Output voltage: 0.4 mV/Pa at 1 kHz
  • Impedance : 300 Ω
  • Ambient temperature (operation) -15°C to +55°C
  • Ambient temperature (storage) -55°C to +70°C
  • Weight w/o cable : approx. 200g
  • Gator Waterproof Case:
  • Black waterproof injection molded case with interior dimensions of 18" x 13" x 6.9". DICED FOAM
  • Main Features:
  • Carry case for Audio Visual Recording Equipment - Electronic Equipment - and Optical Lenses
  • Water and dust proof with IP 67 certification
  • ATA-300 Certification
  • Impact proof lightweight NK-7™ resin
  • Easy Release Powerclaw™ Latching System
  • Soft grip comfort handle
  • Pad-Lockable
  • Mil-STD-810F Immersion Test Certified
  • Empty Case Interior (18" x 13" x 6.9")