FREE SHIPPING on online orders over $99

Broadcast Tools DTD16PLUS G2 NET



DTMF tone/sequence decoder with 8 SPST relays, 8 OC’s, USB/Serial and Ethernet COM ports

$341.05 $359.00
You save $17.95

The DTD-16 + G2 NET is a full-featured DTMF tone/sequence decoder that is user programmable to decode single tones or sequences up to six tones in length which can be assigned to any one of eight SPST normally open relays, eight open collectors and USB/RS-232 serial/Ethernet ports. The DTD’s relay and open collector outputs can be programmed to close for the duration of tone, pulse immediately after completion of detection, wait a programmed (up to 9.99 seconds) length of time after detection, or latch/unlatch. Programming is performed using a non-dedicated PC’s USB, RS-232 serial, or Ethernet port equipped with a terminal program like HyperTerminal, Tera Term, or PuTTY.

$341.05 $359.00
You save $17.95

Free Shipping

Out of stock

Add to quote
Qualifies for free shipping
  • Main Features:
  • Decodes all 16 DTMF tones or user-programmed tone sequences.
  • Front panel tone audio input level control with a range of -20 to +24dbu
  • Adjustable tone detection time.
  • 8 SPST relay outputs and 8 open collector outputs.
  • Front panel relay status, power, tone activity, program mode, and activity LEDs.
  • Programmed via USB, RS-232 serial, or Ethernet (TCP/UDP socket) connection.
  • Mode configuration via front panel dip-switches.
  • Relay, open collector and tone audio connections on removable euro-block screw terminal connectors to simplify wiring and service, mating plugs are supplied.
  • Fully RFI proofed.
  • Surge protected power supply. Domestic power supply included.
  • Up to three units may be mounted on the optional RA-1 rack shelf, using four supplied Velcro feet. Desktop and wall mounting is also possible.
  • Specifications:
  • Input Level: -20dBu to +24dBu.
  • Input Impedance: 200K Ω balanced, 100K Ω unbalanced.
  • Relay Outputs: Eight SPST, normally open dry contacts. 30 VDC @ 1 amp max.
  • Open Collector Outputs: Eight, sinking up 6 VDC / 50 mA max to ground.
  • RS-232 Serial: 9600, 8,N,1 / RJ11 jack. Reverse module cable and RJ11 to DB9 adapter (S9) included.
  • USB Serial: 9600, 8,N,1 / USB type B female. FTDI Chipset.
  • I/O Connectors: Audio Inputs, relays, and open collector outputs. Removable screw terminal blocks.
  • Power: 9-12 VDC, greater than 500 mA. 2.1mm ID x 5.5mm OD coaxial connector, center positive, surge protected. Universal switching power supply with domestic connector supplied. International power supply optional.
  • Dimensions:6 x 5.25 x 1.63 in (W x L x H)