null

Barix Annuncicom 155

BARIX

BSW PART:
ANNUNCICOM155

Annuncicom 155 US Package w/o Power Supply

Contact BSW for your pricing and shipping!

The Annuncicom 155 is a ruggedized, universal Audio over IP device designed to serve as a gateway between IP Paging, VoIP and Intercom systems and traditional microphone/speakers or amplifers. Supporting both music (MP3) as well as voice codecs (G.711, uLaw, aLaw) and a large number of protocols (including shoutcast, SIP etc), the device can be used for both surveillance as well as VoIP applications.

Applications:

• Generic VoIP Intercom and Paging Device with speaker amplifier

• Voice Evacuation Systems

• Microphone Encoder for IP Audio Surveillance

• Help Point/SOS call box device

• Live IP Audio Encoder for Streaming Applications

• Generic, bidirectional full-duplex VoIP module for Paging and Intercom applications

• Digital Annunciator, Message Player, Message Repeater

• SIP and IP Paging Zone Device

Contact BSW for your pricing and shipping!

Free Shipping

Out of stock

Add to quote

Contact BSW for your pricing and shipping!

Qualifies for free shipping
  • Main Features:
  • G711, PCM Encoding and Decoding
  • MP3 Encoding and Decoding
  • Audio Level Supervision with SNMP Trap generation
  • IP Streaming via TCP, UDP, RTP, Multicast
  • Microphone Input
  • Line Level Output
  • Amplified Output 5W (8 Ohm)
  • Contact Closure Input (2)
  • RS-485 Serial Port (1)
  • Power Supply (not included)
  • Supply Voltage (18..28V)
  • Dual Ethernet • Supervised Speaker/Mic and Control Interface
  • IP65 rating, tested to EN50155, suitable for applications in rolling stock
  • Wide operating temperature range (-40..+70'C), shock and vibration resistant
  • Current sourcing Outputs (1
  • Specifications:
  • Electrical
  • 24 to 48 VDC ± 30%, <60 V, 16 Watt max.
  • M12 "A" connector (male)
  • Ethernet
  • 2x 10/100Mbps auto, MDI/MDI-X, Link & Activity LEDs per interface, Internal switch, Protocols: TCP/IP, UDP, RTP, SIP, DHCP
  • M12 "D" connector (female)
  • RS-485
  • 300..230'400 Baud asynchronous, 7/8 bit
  • +12V, 100mA, fused supply output to external devices
  • M12 "A" connector (female)
  • Line out
  • max. 11 dBm @ 600 Ohm, max. 12 dBu (FS), unloaded
  • Output impedance 40..45 Ohm, 14 mWatt max
  • Values @ 600 Ohm: Freq. response 20 Hz .. 20 kHz (-3dB),
  • Dynamic range 80dB, SNR -80dB, THD <0.15% (-3dBFS)*
  • Output level software controllable
  • Speaker out
  • 5.5 Watt RMS max @ 8 Ohm
  • Values @ 8 Ohm: Freq. response 10 Hz .. 15 kHz (-3dB),
  • Dynamic range 82dB, SNR -82dB, THD <0.1% (-3dBFS)*
  • Output level software controllable
  • Microphone in
  • Electret mic, supervised bias power (2.4..4 VDC)
  • Frequency response 50Hz ..20kHz (-3dB)*
  • Dynamic range 70dB, SNR -70dB, THD <0.05% (-3dBFS)*
  • input sensitivity software controllable
  • Audio formats
  • MP3, encoding/decoding up to 192/320kbps
  • PCM 16bit @8, 16, 22.05, 24, 32, 44.1, 48 kHz
  • G.711, uLaw, aLaw (sample rates same as PCM) Discrete I/O
  • 2 fully supervised inputs
  • 1 LED driver output, current limited
  • internal temperature sensor
  • 2 status LEDs (red/green) Panel interface
  • Sub-D 15 connector, all audio and I/O signals
  • Mechanical
  • Aluminum case, 460 g, with mounting wings Min. mounting space incl. plugs (W x D x H)
  • 230 x 138 x 47 mm (9 x 5.43 x 1.85 inch)
  • Dimensions (W x D x H)
  • 130 x 108 x 38 mm (5.12 x 4.25 x 1.5 inch)
  • MTBF
  • Calculated acc. to MIL217F at 40 °C
  • Min. 68 000h at "ground mobile" environment
  • Min. 160 000h at "ground fix" environment
  • * depends on used codec, best results @48kHz PCM