null

Aviom AN160V4

Aviom

BSW PART:
AN160V4

16-Channel Mic- and Line-Level Output Module (4 Output Levels)

$1,499.00 $1,570.00
You save $71.00

The AN-16/o v.4 Output Module connects to any Pro16 input module, console card, or A-Net distributor and provides 16 balanced TRS line-level analog outputs. Five output levels, from mic to +24dBu, are available to easily accommodate the level requirements of the gear its output signals are being connected to. Use the AN-16/o v.4 anywhere analog outputs are required: on stage or at FOH in a digital snake, in the studio, for a recording split, or in even the most complex audio networks. Adding a digital split to a Pro16 system is as simple as connecting an additional AN-16/o v.4 Output Module.

$1,499.00 $1,570.00
You save $71.00

Free Shipping

Out of stock

Add to quote
Qualifies for free shipping
  • Main Features:
  • 16 balanced mic- or line-level outputs
  • Four-position output level switch per channel pair
  • +24, +18, and +4dBu line-level, or mic-level outputs
  • 48kHz, 24-bit D/A converters
  • Unlimited splits and digital copies
  • Specifications:
  • Audio Outputs: 16 channels, balanced
  • Outputs: DB25 multipin connectors (2); Tascam® analog audio pinout Impedance balanced output for mic, +4dBu, and +18dBu; differential output for +24dBu
  • D/A Conversion: 48kHz sample rate, 24 bit
  • Frequency Response: 4Hz-22kHz
  • A-Net Input/Output: one EtherCon Category 5 (RJ45 connector)
  • A-Net Expansion: one EtherCon Category 5 (RJ45 connector)
  • Output Level Settings: Four-position switch, per channel pair; +24dBu, +18dBu, +4dBu, and Mic
  • Channel LED Indicators: Signal Present and Clip, per channel
  • Metering: LEDs; green: Signal Present; red: Clip; per channel
  • Maximum Output Level: +24dBu
  • Output Impedance: 226 ohms (+18dBu, +24dBu); 100 ohms (+4dBu and mic)
  • Freq. Response: 4Hz-22kHz +0.2dB/-3dB
  • THD +N: < 0.004%
  • Crosstalk: -90dB
  • Bit Error Rate (BER): 10(-12)
  • Signal to Noise (unweighted): 92dB typical, A/D to D/A Measured from AN-16/i to AN-16/o v.4 Output Module
  • Digital Connections: A-Net In: 1; A-Net Out: 1; A-Net Expansion: 1; Neutrik EtherCon connectors
  • A-Net Pro16: A-Net Expansion combines two A-Net streams (32 channels of audio) onto one Cat-5e cable; uses unshielded Cat-5e UTP (or better) cable
  • Latency: <0.620 msec (measured from analog input to analog output)
  • Power Supply:
  • Power Supply: External, DC, universal switching type
  • Input Voltage: 100-240 volts, 50/60Hz, 30VA
  • Output Voltage: 24 VDC, 0.5 amp
  • Plug Size:2 mm
  • Power: 24 VDC, 500mA
  • Dimensions: 19" (482.6 mm) wide x 5.75" (146 mm) deep; 1U high
  • Weight: 6.8 lbs. (3.08 kg)
  • Options: SB4 System Bridge; used to combine up to four A-Net streams for transmission over one Cat-5e cable