null

FREE SHIPPING ON ORDERS $100 OR MORE *

* Restrictions apply, click here to view our shipping policy

Audio Technica ATW-DR3220LKDF2

Audio Technica ATW-DR3220LKDF2

ATECHNICA

BSW PART:
ATW-DR3220LKDF2

2-Channel Audio-Technica LINK-Enabled Receiver

More Wireless Microphone Systems More Audio Technica
$1,099.00 MSRP: $1,293.00
You save $194.00

The ATW-DR3220LK is an Audio-Technica LINK-enabled 2-channel receiver for the D50 digital UHF wireless system. This half-rack receiver operates in one of two switchable RF modes: normal mode (Antenna Combining Diversity) or robust mode (MRC True Diversity) for greater RF stability. Up to four receivers can be linked and operated without antenna distribution, requiring only a single pair of antennas. Plus, the system’s HD (high-density) mode gives users the option of expanding the number of usable frequencies from the standard 17 within a 6 MHz TV channel block to 47 frequencies in HD – a feature that can be especially useful in the congested RF environments of large cities.

The receiver comes with an AC adapter, but can also be powered by PoE+, either exclusively or as a backup power source for the AC.

$1,099.00 MSRP: $1,293.00
You save $194.00

Free Shipping

Out of stock

Add to quote

  • Main Features:
  • Audio-Technica LINK-enabled, 2-channel, half-rack receiver for the D50 digital UHF wireless system
  • Full tuning bandwidth of up to 244 MHz, depending on region (up to 138 MHz in the U.S.), in the broadcast range enables flexible channel planning in complex RF environments
  • Switchable between normal mode (Antenna Combining Diversity) and robust mode (MRC True Diversity), which offers superior RF stability
  • User can switch from Standard mode (17 frequencies per 6 MHz TV channel) to HD mode (47 frequencies per 6 MHz TV channel) when operating in congested urban RF environments
  • Onboard DSP offers high-pass filter, 4-band EQ, and compressor settings for each channel
  • Supports AES256 encryption for superior security
  • Equipped with a network port for monitoring and device configuration via Wireless Manager
  • Receiver can be powered by included AC adapter or PoE+; PoE+ also provides redundancy to keep the receiver powered if AC drops out
  • Receiver can be set to mixed output in situations where input channels are limited
  • Spectrum analysis (accessible via receiver’s front-panel display and/or Wireless Manager software) and IR sync functionality make setup easy
  • Wireless Manager’s system management tools include those to configure detailed EQ and COMP settings, and an advanced walk test for visual confirmation of multiple RF conditions
  • Multipoint receiver function allows a transmitter to be detected by multiple D50 networked receivers, with Wireless Manager software automatically switching to the receiver that has the best signal
  • Included short and long rack ears can be used to mount one receiver in a half-rack space and two long ears can be combined as a joining plate to mount two receivers in a full space
  • TAA-compliant (U.S.); Radio Equipment Directive (RED) cybersecurity-compliant (EU)
  • Firmware updates are performed in Wireless Manager
  • Includes: ATW-DR3220LK receiver, short and long rack ear kit, power supply, antennas, front-mount antenna kit
  • Specifications:
  • Overall System
  • Operating Frequencies
    - DF2: 470.125 to 607.875 MHz
    - DF3: 470.125 to 693.875 MHz
    - EF3: 580.000 to 693.875 MHz
  • Modulation Mode
    - Standard: 8-PSK
    - HD mode: 16QAM
  • Occupied Bandwidth
    - Standard: 192 kHz
    - HD mode: 96 kHz
  • Frequency Response
    - Standard: 20 to 20,000 Hz
    - HD mode: 20 to 20,000 Hz
    - Depending on attached microphone element.
  • Operating Range
    - 100 m (328′)
    - Open range environment with no interfering signals.
  • Dynamic Range
    - ATW-DT3201 (Mic input): 120 dB, A-weighted, typical
    - ATW-DT3201 (Inst. input): 109 dB, A-weighted, typical
    - ATW-DT3202: 120 dB, A-weighted, typical
    - ATW-DT3207: 120 dB, A-weighted, typical
  • Total Harmonic Distortion
    - 0.1% or less (at 1 kHz, -20 dBFS)
  • Maximum Simultaneous Use (recommended)
    - Standard: 17 channels / 6 MHz, 22 channels / 8 MHz
    - HD mode: 47 channels / 6 MHz, 63 channels / 8 MHz
    - Results may vary depending on the radio environment and usage conditions.
  • Delay
    - Standard: 2.1 ms typ.
    - HD mode: 3.3 ms typ.
  • Audio Sampling Rate
    - Standard: 48 kHz
    - HD mode: 48 kHz
  • Encryption System
    - AES256
  • Notes
    - For product improvement, the product is subject to modification without notice.