- Specifications:
- Overall System
- Operating Frequencies: UHF
- Band D: 656.125 to 678.500 MHz DISCONTINUED IN NORTH AMERICA
- Band I: 487.125 to 506.500 MHz
- Band S: 508.125 to 526.825 MHz
- Modulation Mode: FM
- Maximum Deviation: ±40 kHz
- Frequency Response: 100 Hz to 15 kHz (+1 dB, -3 dB)
- Operating Range: 100 m (300'), typical
- Open range environment with no interfering signals.
- Total Harmonic Distortion: < 1% (at 1 kHz, ±20 kHz deviation)
- Operating Temperature Range: 5º C to 45º C / 41º F to 113º F
- Battery and LCD performance may be reduced at very low temperatures.
- Number Of Channels: 10 total - Notes
- Third-generation 2000 Series (“b” version) components: ATW-R2100b receiver, ATW-T210a body-pack transmitter, ATW-T220a cardioid dynamic microphone/transmitter
- Second-generation 2000 Series (“a” version) components: ATW-R2100a receiver, ATW-T210a body-pack transmitter, ATW-T220a cardioid dynamic microphone/transmitter
- First-generation 2000 Series (original) components: ATW-R2100 receiver, ATW-T210 body-pack transmitter, ATW-T220 cardioid dynamic microphone/transmitter
- CONSUMER ALERT: Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this wireless microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device.
- Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. - Handheld Transmitter
- RF Power Output: High: 30 mW; Low: 10 mW (switchable), at 50 ohms
- Spurious Emissions: Following federal and national regulations
- Microphone Element: Dynamic cardioid
- Battery Type: Two 1.5V AA alkaline (not included) or two 1.2V AA NiMH (not included)
- Recharging power for NiMH batteries (with ATW-CHG2)
- U.S./Canada/Latin America: 3.2 V DC, 230 mA x2
- Other world areas: 3.2 V DC, 320 mA x2
- Battery Life: High: 7 hours (alkaline), Low: 9 hours (alkaline)
- Depending on battery type and use pattern.
- Dimensions: 232.0 mm (9.13") long, 48.0 mm (1.89") diameter
- Net Weight: 252 g (8.9 oz), without batteries
- Accessories Included: AT8456a Quiet-Flex™ stand clamp - Body Pack
- RF Power Output: High: 30 mW, Low: 10 mW (switchable), at 50 ohms
- Battery Life: High: 7 hours (alkaline), Low: 9 hours (alkaline)
- Depending on battery type and use pattern.
- Battery Type: Two 1.5V AA alkaline (not included) or two 1.2V AA NiMH (not included)
- Recharging power for NiMH batteries (with ATW-CHG2)
- U.S./Canada/Latin America: 3.2 V DC, 230 mA x2
- Other world areas: 3.2 V DC, 320 mA x2
- Dimensions: 66.0 mm (2.60") W x 22.5 mm (0.89") D x 92.3 mm (3.63") H
- Input Connections: Four-pin Locking Connector
- Pin 1: GND
- Pin 2: INST INPUT
- Pin 3: MIC INPUT
- Pin 4: DC BIAS +9V
- Net Weight: 81 g (2.9 oz), without batteries
- Spurious Emissions: Following federal and national regulations - Receiver
- Receiving System: True diversity
- Image Rejection: 60 dB nominal, 55 dB minimum
- RF Sensitivity: 20 dBuV at 60 dB S/N ratio (50 ohms termination)
- Antenna Input: BNC-type, 50 ohms
- Bias voltage 12V DC, 60 mA, each
- Power Requirements: 12-18V DC, 500 mA
- Dimensions: 210.0 mm (8.27") W x 162.2 mm (6.39") D x 44.0 mm (1.73") H
- Not including BNC connectors or feet.
- Weight: 1.0 kg (35.3 oz), without accessories
- Accessories Included: Two flexible UHF antennas; AC adapter (country dependent); rack-mount adapters - Additional Receiver Specs
- Maximum Output Level: XLR, balanced: +9 dBV
- ¼" (6.3 mm), unbalanced: +4 dBV
- Balanced Audio Output Attenuator: Two position switch: 0 / -12 dB
FREE SHIPPING ON ORDERS $100 OR MORE *
* Restrictions apply, click here to view our shipping policy