null

Ashly NE4250

Ashly

BSW PART:
NE4250

Network Power Amplifier 4 x 250W at 4 Ohms

$1,979.00 $2,474.00
You save $495.00

Connecting and controlling an amplifier for networked systems has now been simplified with Network-Enabled Amplifiers. This line offers ease of use, setup and control using standard 10/100 Ethernet protocol and Protea™ ne Software. No special outboard control units are needed. Choose either 4-channel ne4250 or 8-channel ne8250 amplifiers are rated at 250W per channel with separate HI-Z and LO-Z models. ne Series amplifiers are offered in two separate platforms—the standard network amplifier or a network amplifier with an on-board Protea™ DSP Processor. Each can be customized for any installation by adding your choice of AES3 inputs, Dante™ or CobraNet™ card. NE Multi-Channel amplifiers are also offered with 240V Line Voltage in either Low-Z or 100V constant voltage output models for International customers.

$1,979.00 $2,474.00
You save $495.00

Free Shipping

Out of stock

Add to quote
Qualifies for free shipping
  • Main Features:
  • 10/100 Ethernet comes standard for remote control and monitoring
  • FIR Filter capable (with DSP)
  • Low-Z, 25V, 70V, 100V models
  • Protea DSP, AES3, CobraNet® and Dante® input options
  • DC voltage remote gain control
  • Switched-mode power supply, Class-D output
  • Stepped, calibrated input attenuators
  • Remote power standby
  • Disable all front panel controls via software
  • Temperature sensitive variable speed fan with side-to-front airflow
  • Selectable HPF frequencies (80Hz, 400Hz, off) on 25V, 70V, and 100V models
  • 4-stage level meters
  • Output current and temp indicators
  • Safety/Compliance: cTUVus, CE, FCC, RoHS
  • Specifications:
  • Frequency Response: 20Hz–20kHz, (unweighted) ±1dB
  • Input Impedance: 20k Ohms, Balanced
  • Voltage Gain: 26dB (Low-Z), 32dB (70V), 35dB (100V)
  • Input Sensitivity: 6.2dBu (Low-Z), 4.2dBu (25V), 7.2dBu (70V), 7.2dBu (100V)
  • Maximum Input Level: +21dBu
  • Software Contolled Internal HPF (25V, 70V, 100V models): 80Hz (12dB/oct), 400Hz (6dB oct), OFF
  • Signal to Noise (20-20k, Unweighted):
  • >107db (2450)
  • >107dB (8250)
  • Distortion (8 Ohm load)
  • *(SMPTE) <0.5% typical
  • ∆ (THD-N) <0.5% typical (20Hz-20kHz)
  • Damping Factor (8 Ohms, 1kHz): >250
  • Output Circuitry: Class D
  • Amplifier/Load Protection: Output Overcurrent, Main Supply Rail Overvoltage, Chassis Temperature, Inrush Limiting, Mains Fuse
  • Rear Panel:
  • Controls: Ethernet, Channel bridge switch (Low-Z only), Remote standby, Preset recall (4), Remote Level (8), Remote Data
  • Connectors (each channel):
  • Input: Euroblock
  • Output: Euroblock
  • Power Requirements:
  • AC Main 120VAC or 240VAC ±10% (factory set), 50–60Hz
  • Power Cable Connector: 15A Edison, 3-Prong IEC
  • Weights and Dimensions:
  • Dimensions: 19” W x 3.50" H x 16.84” D (483mm x 89mm x 428mm)
  • Airflow: IN through sides, OUT through front
  • Unit Weight:
  • 4250: 23 lbs (10.4 kg)
  • 8250: 24.7 lbs (11.2 kg)
  • Shipping Weight:
  • 4250: 29.1 lbs (13.2 kg)
  • 8250: 30.8 lbs (13.9 kg)
  • Environmental: 40-120° F, (4-49° C) noncondensing
  • Safety/Compliance: cTUVus, CE, FCC, RoHS