null

FREE SHIPPING ON ORDERS $100 OR MORE *

* Restrictions apply, click here to view our shipping policy

Illustrative image of: Ashly MX206: Utility Mixers: MX206

Ashly MX206

Ashly

BSW PART:
MX206

6 Input Stereo Mic Mixer

More Ashly More Utility Mixers
$1,049.00 $1,311.00
You save $262.00

Bring competing mic signals together in perfect harmony with this compact feature-packed mixer.

This rack-mountable six-channel stereo microphone mixer features ultra low-noise studio-grade mic preamps with switchable 20dB pads, a continuously variable gain trim to handle mics with different input sensitivities, switchable 48 Volt phantom power for use with condenser mics, and a peak LED indicator. It has loads of headroom to handle even the hottest signals without distortion. Its transformer-isolated XLR balanced outputs can drive +24dBu into 600 ohms, and its separate TRS 1/4” output can be used either balanced or unbalanced. It also sports an RCA-jack Pre-master output so you can link it to multiple mixers.

A perfect fit in either fixed or portable installations (by itself or as a supplement to larger mixing consoles), its rugged design ensures long-lasting superior audio performance whenever you power it up.

$1,049.00 $1,311.00
You save $262.00

Out of stock

Add to quote
  • Main Features:
  • High-gain mic preamps with very low noise and distortion
  • High Gain (84 dB Channel Input to Program Output) ensures full output with low level or distant mics
  • Transformer-Isolated balanced XLR mono Output Pan Control on each channel
  • 48V Phantom Power for Condenser Mics
  • Auxiliary Tape/CD Inputs and Outputs
  • Stereo Headphone Jack with Level Control
  • 5-year warranty
  • Specifications:
  • THD: <.05 % @ +20dBu, 20Hz-20kHz; input switch at -40dB
  • IMD (SMPTE): <0.02 % @ +20dBu; input switch at -40dB
  • Hum and noise (20Hz-20kHz noise bandwidth): <-129dBu equivalent input hum and noise; <-100dBu residual output noise, level controls minimum; <-84dBu Master Out, Master Level at nominal, channel level controls at min; <-67dBu Master Out, Master Level and one Channel Level at nominal
  • Frequency response: 20Hz-20kHz, +0/-0.5dB
  • Maximum voltage gain: 84 ±2dB: Mic Input to Master Output; 34 ±2dB: Aux Input to Master Output
  • Crosstalk: <-60dB @ 20kHz, between any inputs or outputs
  • VU meter: Two 5-segment LED meters, 0 VU = +4dBu
  • Peak indicators: Peak Clip indicator on each input channel and on outputs, illuminating 3dB below clipping
  • Phantom power: +48 VDC applied to all Mic Inputs, switchable on back panel; gradual power-up/down to eliminate pops
  • Dimensions: 19” L x 1.75” H x 6.6” D
  • Shipping weight: 10 lbs maximum
  • Power requirements: 120VAC nominal, 93VAC minimum, 50-60Hz, 17 watts (240VAC available)
  • Stereo Headphone Output with Level Control
  • U.L. Listed