FREE SHIPPING on online orders over $99

Allen and Heath dLive S7000



dLive S Class 36 Fader Surface

Contact BSW for your pricing and shipping!

The S7000 is a 36 fader dLive S Class remote control Surface with two 12” capacitive touchscreens. The S7000 can control any MixRack / Mainframe. Up to 4 control Surfaces can be connected to a single MixRack / Mainframe. 36 faders & 36 rotaries are freely assignable in 6 layers on the surface, giving 192 “control strips.” The S7000 can be connected with a single CAT5e cable or a dual redundant mode Cat5e cable to the Mixrack/Mainframe. Two 128x128 channels option


slots are available on the back. With the S7000 surface you can choose the control for the end-user through custom layouts and user permissions.

Contact BSW for your pricing and shipping!

Out of stock

Add to quote
  • Main Features/Benefits:
  • Mix and match with any MixRack
  • Custom fader layout
  • Self-locking Ethercon connectors
  • Local I/O and extra DX port
  • No noise, fanless design
  • 2 x 12” Capacitive touchscreen
  • 2x 128x128 I/O ports for extra audio networking
  • User permissions
  • 192 Control strips
  • 26 User assignable keys
  • Specifications:
  • Inputs:
  • Mic/Line XLR Inputs: Balanced XLR, +48V phantom power
  • Mic/Line Preamp: Fully recallable
  • Input Sensitivity: -60 to +15dBu
  • Analogue Gain: +5 to +60dB, 1dB steps
  • Pad: -20dB Active PAD
  • Maximum Input Level: +30dBu (PAD in)
  • Input Impedance: >4kΩ (Pad out), >10kΩ (Pad in)
  • Mic EIN: -127dB with 150Ω source
  • Phantom Power indication: Per socket, internal or external phantom power sensing, triggered at 24V
  • Digital Inputs: AES3 2 Ch XLR, 2.5Vpp balanced terminated 110 Ω SRC on each pair, range 32k - 192kHz, with bypass option
  • Outputs:
  • Analogue XLR Outputs: Balanced, Relay protected
  • Output Impedance: <75Ω Nominal Output +4dBu = 0dB meter reading
  • Maximum Output Level: +22dBu
  • Residual Output Noise: -92dBu (muted, 20-20kHz)
  • Digital Outputs:
  • -90dBu (muted, 20-40kHz)
  • AES3 2 Ch XLR, 2.5Vpp balanced terminated 110 Ω
  • 96kHz sampling rate, switchable to 48kHz, 44.1kHz
  • System:
  • (Measured balanced XLR in to XLR out, 20-20kHz, minimum Gain, Pad out)
  • Dynamic Range: 110dB
  • System Signal to Noise: -92dB
  • Frequency Response: 20Hz - 30kHz +0/-0.8dB
  • THD+N (analogue in to out): 0.0015% @ +16dBu output, 1kHz 0dB gain
  • Headroom: +18dB
  • Internal operating Level: 0dBu
  • dBFS Alignment: +18dBu = 0dBFS (+22dBu at XLR output)
  • Meter Calibration: 0dB meter = -18dBFS (+4dBu at XLR out)
  • Meter Peak indication: -3dBFS (+19dBu at XLR out)
  • Sampling Rate: 96kHz +/- 20 PPM
  • ADC: 24-bit Delta-Sigma
  • DAC: 24-bit Delta-Sigma
  • Latency:
  • 0.7 ms (MixRack XLR in to XLR out, Input to Mix)
  • + 5 samples, Surface to Mixrack (GigaACE hop)
  • + 8 samples, DX32 to Mixrack (DX hop)
  • Operating Temperature Range (Fitted with):
  • MPS16 V1 300w: 0°C to 35°C (32°F to 95°F)
  • MPS16 V2 250w: 0°C to 40°C (32°F to 104°F)
  • Mains Voltage Operating Range: 100-240V AC, 50/60Hz
  • Mains Power: 300W max (MPS16 V1 300W)
  • Consumption: 250W max (MPS16 V2 250W)