­

Universal Audio VOLT 276

Universal Audio

BSW PART:
VOLT276

2-in/2-out USB 2.0 Audio Interface

$299.00 $374.00
You save $75.00
$299.00 $374.00
You save $75.00

Out of stock

Add to quote

  • Main Features:
  • Desktop 2-in / 2-out USB audio interface with 2 preamps and class-leading 24-bit / 192 kHz audio conversion
  • Vintage Mic Preamp mode for recording your voice, guitar, or any instrument with the rich, full sound of an iconic UA tube preamp
  • 76 Compressor adds clarity and punch to vocals, instruments, and other sources with analog circuit based on UA's renowned 1176
  • Listen in realtime as you record with Direct Monitoring for latency-free recording
  • Bus-powered and class-compliant for hassle-free set-up with Mac, PC, iPad, and iPhone using the included USB-C to USB-A cable
  • Studio-quality headphone amplifier for loud, clear monitoring
  • 48V phantom power for condenser microphones
  • Stylish, rugged construction built to withstand years of use
  • Connect MIDI controllers, synths, and drum machines through the onboard 1-in / 1-out MIDI connection
  • Specifications:
  • SYSTEM
  • A/D – D/A Conversion:
  • Supported Sample Rates (kHz): 44.1, 48, 88.2, 96, 176.4, 192
  • Bit Depth Per Sample: 24
  • ANALOG I/O
  • Mic, Line, Instrument Input(s):
  • Vintage mode (all Volt models): Selectable ON/OFF
  • 76 Compressor presets (176, 276, 476 only): Selectable VOC, GTR, FAST, OFF
  • 76 Compressor preset times (Attack / Release times (approximate))
    -VOC: Attack 2 ms / Release 300 ms
    -GTR: Attack 1.5 ms / Release 700 ms
    -FAST: Attack 30 µs / Release 35 ms
  • Compression Ratio: 6:1
  • Microphone Input(s):
  • Frequency Response: 20 Hz to 20 kHz, ±0.1 dB
  • Dynamic Range (A–weighted): 112 dB
  • Total Harmonic Distortion + Noise (1 kHz @ -1 dBFS): -103 dB (0.0007 %)
  • Equivalent Input Noise (150 Ohms, A-weighted): -127 dBu
  • Maximum Input Level: 9 dBu
  • Input Impedance: 3 Kilohms
  • Available Gain: 55 dB
  • Phantom Power: +48V (switchable)
  • Connector Type: XLR Female, pin 2 positive
  • Instrument Input(s):
  • Frequency Response: 20 Hz to 20 kHz, ±0.05 dB
  • Dynamic Range (A–weighted): 111 dB
  • Total Harmonic Distortion + Noise (1 kHz @ -1 dBFS): -84 dB (0.006 %)
  • Maximum Input Level: 12.5 dBu
  • Input Impedance: 1 Megohms
  • Gain Range: 55 dB
  • Connector Type: ¼” TS unbalanced
  • Line Input(s):
  • Frequency Response: 20 Hz to 20 kHz, ±0.05 dB
  • Dynamic Range (A–weighted): 111 dB
  • Total Harmonic Distortion + Noise (1 kHz @ -1 dBFS): -102 dB (0.0008 %)
  • Maximum Input Level: 22 dBu
  • Input Impedance: 15 Kilohms
  • Gain Range: 55 dB
  • Connector Type: ¼” TRS balanced or TS unbalanced
  • Monitor & Line Outputs:
  • Frequency Response: 20 Hz to 20 kHz, ±0.1 dB
  • Dynamic Range (A–weighted): 110 dB
  • Total Harmonic Distortion + Noise (1 kHz @ -1 dBFS): -102.5 dB (0.00075%)
  • Maximum Output Level: 15 dBu
  • Output Impedance: 100 Ohms
  • Connector Type: ¼” TRS balanced or TS unbalanced
  • Stereo Headphone Outputs:
  • Frequency Response: 20 Hz to 20 kHz, ±0.1 dB
  • Dynamic Range (100K load, A-weighted): 110 dB
  • Total Harmonic Distortion + Noise (1 kHz @ -1 dBFS, 300 Ohms): -100 dB (0.001%)
  • Maximum Output Power into 32 Ohms: 84 mW per channel
  • Maximum Output Power into 300 Ohms: 22 mW per channel
  • Maximum Output Power into 600 Ohms: 12 mW per channel
  • Connector Type: ¼” TRS Stereo
  • ELECTRICAL
  • External DC Power Input: Barrel, female, 5.5mm OD, 2.1mm ID, IEC 60130-10 Type A
  • Power Supply, Electrical Requirements: +5VDC, Center Positive (+)
  • ENVIRONMENTAL
  • Ambient Temperature Range: 32° to 104° F (0° to 40° C)
  • MECHANICAL
  • Volt 276 Dimensions(Width x Depth x Height): 7.3 x 5.1 x 2.6 in (18,4 x 13,0 x 6,6 cm)