- Main Features:
- Input Channel sources can be easily assigned to each of the individual 3 Zone Outputs
-MONO/STEREO select switch on each Output Channel (*1)
-Euroblock connectors provide seamless connection and configuration in fixed installations - 3 Input Channels:
-Channel 1 : LINE input (RCA, Unbalanced)
-Channel 2 : LINE input (RCA, Unbalanced)
-Channel 3 : Bluetooth® / 3.5mm (1/8") AUX input (*2) - 2 MIC inputs for announcements or Talk Over:
-Individual +48V phantom power switch on each channel
-3 band EQ and High Pass Filter for adjusting Input Channel signal tone and quality
-MIC 1 connection available via a front panel XLR/TRS combo jack or rear panel Euroblock connectors - Talk Over feature enables automatic background music volume attenuation in desired Zone when mic audio is detected
- Headphone jack enables monitoring of each output channel
- Compact 1U rack-mount size
- Specifications:
- MIC INPUT (BALANCED) jack (front):
-Connector:
XLR-3-31 equivalent (1: GND, 2: HOT, 3: COLD)
6.3mm (1/4") standard TRS jack (Tip: HOT, Ring: COLD, Sleeve: GND)
-Rated input level: -26dBu (0.039 Vrms, when FRONT HIGH), -2dBu (0.616 Vrms, when FRONT LOW)
-Maximum input level: -10dBu (0.245 Vrms, when FRONT HIGH), +14dBu (3.884 Vrms, when FRONT LOW)
-Minimum input level: -65dBu (0.0004 Vrms, when FRONT HIGH), -41dBu (0.007 Vrms, when FRONT LOW)
-Gain adjustment range: 39dB
-Input impedance: 2.4kΩ - MIC IN 1-2 (BALANCED) connectors (rear):
-Connectors: Euroblock (balanced) 3.81mm pitch
-Rated input level: -26dBu (0.039 Vrms, when PAD switch OFF), -2dBu (0.616 Vrms, when PAD switch ON)
-Maximum input level: -10dBu (0.245 Vrms, when PAD switch OFF), +14dBu (3.884 Vrms, when PAD switch ON)
-Minimum input level -65dBu (0.0004 Vrms, when PAD switch OFF), -41dBu (0.007 Vrms, when PAD switch ON)
-Gain adjustment range: 39dB
-Input impedance: 2.4kΩ - LINE INPUTS 1-2 (UNBALANCED) connectors (rear):
-Connectors: RCA pin jacks
-Nominal input level: -10dBV (0.316 Vrms)
-Maximum input level: +6dBV (2.0 Vrms)
-Gain adjustment range: -16dB to +16dB
-Input impedance: 10kΩ or higher - AUX IN (UNBALANCED) jack (front):
-Connector: 3.5mm (1/8") stereo mini jack
-Nominal input level: -20dBV (0.1 Vrms)
-Maximum input level: -4dBV (0.63 Vrms)
-Input impedance: 10kΩ or higher - OUTPUTS (BALANCED) connectors:
-Connectors: Euroblock (balanced) 3.81mm pitch
-Rated output level: +4dBu (1.228 Vrms, when VOLUME knob at 0 dB)
-Maximum output level: +24dBu (12.282 Vrms)
-Output impedance: 200Ω - PHONES jack:
-Connectors: 6.3mm (1/4") standard stereo jack
-Maximum output: 80mW + 80mW or higher (THD+N 0.1% or less, into 32Ω load) - Bluetooth:
-Bluetooth version: 4.2
-Output class: 2 (about 10m unobstructed transmission distance) The transmission distance is only an estimate and might vary depending on the surrounding environment and radio wave conditions.
-Supported profile: A2DP
-Supported A2DP codecs: SBC, AAC, Qualcomm® aptX™ audio
-Supported A2DP content protection SCMS-T - Power: AC 100V - 240V、50/60Hz
- Power consumption: 25 W
- Dimensions: 483 × 46.5 × 274.8mm (W x H x D, including protrusions, excluding Bluetooth antenna)
- Weight: 3.0 kg
- Operating temperature range: 0 - 40°C (32 - 104°F)
- Included items: Power cord × 1, Euroblock plug × 8, Cable band kit × 1, Rackmount screw kit × 1, Owner's Manual (including warranty) × 1, Bluetooth Antenna × 1
- Frequency response:
-MIC INPUT → LINE OUTPUT: 20Hz - 20kHz: +0.5 dB/-1.0 dB*
-LINE INPUT → LINE OUTPUT: 20Hz - 20kHz: ±0.5 dB* - Distortion:
-MIC INPUT (front) → LINE OUTPUT: 0.02% or less*
-MIC INPUT (rear) → LINE OUTPUT: 0.01% or less*
-LINE INPUT → LINE OUTPUT: 0.01% or less* - S/N ratio:
-MIC INPUT → LINE OUTPUT 90dB or higher*
-LINE INPUT → LINE OUTPUT 90dB or higher* - Crosstalk:
-MIC INPUT → LINE OUTPUT 80dB or higher*
-LINE INPUT → LINE OUTPUT 80dB or higher* - Mic amp EIN (equivalent input noise):
-MIC INPUT → LINE OUTPUT -125dBu or less (150Ω, 20kHz LPF, A-weight)
