- Main Features:
- Dante focused interface for connection of external audio into or out of a Dante audio network
- 16 channel analog line input and 16 analog line outputs (48kHz/96kHz) using 4 D-Sub connectors
- Dual redundant Ethernet jacks which support both primary and secondary connections
- Up to 24 bit/96kHz quality
- LED display for signal level and overload per input/output channel
- Reference level dip switches for selectable DBu level metering
- Firmware updatable via Dante port
- AES67 and Revenna compatible
- Specifications
- Formats:
- 44.1/48 kHz, 16/24 bit
- 88.2/96 kHz, 16/24 bit
- Input/output ratings:
- PRIMARY/SECONDARY connectors:
- Connector: RJ-45
- Transmission protocol: Dante
- Gigabit Ethernet standard: 1000BASE-T (IEEE 802.3ab)
- Cables: category 5e or faster STP cables
- ANALOG OUTPUT connectors:
- Connector: D-sub 25-pin
- Locking screws: No. 4-40 UNC (inch type)
- Nominal output levels: +4 dBu, +6 dBu (only when maximum output level is +15 dBu)
- Maximum output levels: +24 dBu, +22 dBu, +20 dBu, +18 dBu, +15 dBu (set by REF. LEVEL switches)
- Output impedance: 200 Ω or lower
- Applicable load impedance: 2 kΩ or higher
- ANALOG INPUT connectors:
- Connector: D-sub 25-pin
- Locking screws: No. 4-40 UNC (inch type)
- Nominal input levels: +4 dBu, +6 dBu (only when maximum input level is +15 dBu)
- Maximum input levels: +24 dBu, +22 dBu, +20 dBu, +18 dBu, +15 dBu (set by REF. LEVEL switches)
- Input impedance: 10 kΩ or higher
- * 0 dBu=0.775 Vrms
- Audio performance:
- ANALOG IN to DANTE OUT:
- Frequency response: +0.1 dB/-0.5 dB: 20 Hz/20 kHz (-16 dBFS input, 44.1/48 kHz sampling frequency, JEITA), +0.1 dB/-0.5 dB: 20 Hz/40 kHz (-16 dBFS input, 88.2/96 kHz sampling frequency, JEITA)
- Distortion (THD+N): 0.001% or less (-1 dBFS input, 1 kHz, 44.1/48/88.2/96 kHz sampling frequency, JEITA)
- S/N ratio: 113 dB or higher (44.1/48/88.2/96 kHz sampling frequency, JEITA)
- Crosstalk: 115 dB or higher (1 kHz, 44.1/48/88.2/96 kHz sampling frequency, JEITA)
- DANTE IN to ANALOG OUT:
- Frequency response: +0.1 dB/-0.5 dB: 20 Hz/20 kHz (-16 dBFS input, 44.1/48 kHz sampling frequency, JEITA), +0.1 dB/-1.0 dB: 20 Hz/40 kHz (-16 dBFS input, 88.2/96 kHz sampling frequency, JEITA)
- Distortion (THD+N): 0.001% or less (-1 dBFS input, 1 kHz, 44.1/48/88.2/96 kHz sampling frequency, JEITA)
- S/N ratio: 110 dB or higher (44.1/48/88.2/96 kHz sampling frequency, JEITA)
- Crosstalk: 115 dB or higher (1 kHz, 44.1/48/88.2/96 kHz sampling frequency, JEITA)
- Other:
- Power: AC100-240 V, 50/60 Hz
- Power consumption: 22W
- Dimensions: 483 × 45 × 303.8 mm (width x height x depth)
- Weight: 3.5 kg
- Operating temperature range: 0–40º
- Included items: Main unit x1, Power cord x1, Rackmount screw kit x1, Owner’s Manual (this document) including warranty x1
