FREE SHIPPING on online orders over $99

Tascam IF-AN16-OUT




$1,029.00 $1,299.00
You save $270.00

The IF-AN16/OUT is an optional 16-channel analog output interface card for the TASCAM expansion slot system. Equipped with two D-sub 25 pin for analog outputs.

Supporting models : TASCAM Sonicview 24XP / TASCAM Sonicview 16XP / DA-6400 / DA-6400dp

$1,029.00 $1,299.00
You save $270.00

Out of stock

Add to quote

  • Main Features:
  • 16 channels of analog outputs
  • Built-in output attenuation for each channel: 0 to -14dB (0.5steps)
  • Two 8-channel D-sub 25pin balanced audio signal outputs (channels 1-8 and 9-16)
  • Compatible with the TASCAM Expansion Slot system
  • Specifications:
  • Formats and channels: 16 channels at 44.1/48/88.2/96kHz, 16-bit/24-bit
  • Analog audio output ratings
    ANALOG 1-8/9-16 OUT connectors:
    -Connector: D-Sub 25pin
    -Locking screws: No.4-40 UNC (inch type)
    -Nominal output levels: +4 dBu, +6 dBu (only when maximum output level is +15 dBu)
    -Maximum output levels: +24 dBu, +22 dBu, +20 dBu, +18 dBu, +15 dBu (Switched according to nominal level of device installed in)
    -Output impedance: 200Ω or lower
    -Output attenuation: 0 to -14 dB (in 0.5dB steps)
  • Dimensions: 107(W) × 40(H) × 161.5(D) mm (including protrusions)
  • Weight: 240g
  • Frequency response:
    +0.1dB/-0.5dB : 20Hz/20kHz (-16dBFS input, 44.1/48kHz sampling frequency, JEITA)
    +0.1dB/-1.0dB : 20Hz/40kHz (-16dBFS input, 88.2/96kHz sampling frequency, JEITA)
    Distortion (THD+N): 0.001% or less (0dBFS input, 1kHz, 44.1/48/88.2/96kHz sampling frequency, JEITA):
    S/N ratio: 110dB or higher (44.1/48/88.2/96kHz sampling frequency, JEITA)
    Dynamic range: 110dB or higher (44.1/48/88.2/96kHz sampling frequency, JEITA)
    Crosstalk: 110dB or higher (1kHz, 44.1/48/88.2/96kHz sampling frequency, JEITA)