- Main Features:
- Four receivers in a rugged 1RU metal chassis with internal power supply
- Individual gain controls, LED meters, and XLR outputs for each channel
- Up to 64 MHz tuning range (region dependent)
- Digital predictive switching diversity
- High Density mode optimizes ULX-D systems to simultaneously operate significantly more channels in applications up to 30 meters
- RF cascade ports allow distribution of RF signal to another unit
- Optimized scanning automatically finds, prioritizes, and deploys the cleanest frequencies to transmitters over IR sync
- Bodypack frequency diversity ensures uninterrupted audio for mission-critical applications
- AES 256-bit encryption-enabled for secure transmission
- Audio summing routes two or more audio channels to combinations of receiver outputs. Use each channel’s gain adjustment to reach the desired mix.
- Dante™ digital networked audio over Ethernet
- Ethernet networking for streamlined frequency coordination and deployment across multiple receivers
- Interference detection and alerts provided on both the receiver and WWB6
- Up to 60 dB independently adjustable gain for each channel
- Wireless Workbench® 6 (WWB6) software integration for advanced coordination, monitoring, and control
- AMX/Crestron® control
- Compatible with the AXT600 Axient® Spectrum Manager
- Yamaha® device ID allows simplified channel patching on CL consoles
- Intuitive front panel LCD menu and controls with lockout feature
- Upgraded LCD with adjustable contrast and brightness
- Audio and RF LED meters with peak indicator
- Switchable mic/line output level
- Remoteable ½ wave antennas
- Specifications:
- RF Carrier Frequency Range: 470–932 MHz, varies by region (Frequency Range are G50, H50, J50, X50 )
- Working Range: 100 m (330 ft) Note: Actual range depends on RF signal absorption, reflection and interference.
- RF Tuning Step Size: 25 kHz, varies by region
- Image Rejection >70 dB, typical RF Sensitivity −98 dBm at 10-5 BER
- Latency: <2.9 ms Audio Frequency Response
- Audio Dynamic Range: A-weighted, typical, System Gain @ +10
- XLR Analog Output: >120 dB
- Dante Digital Output: 130 dB
- Total Harmonic Distortion: −12 dBFS input, System Gain @ +10 <0.1%
- System Audio Polarity:
- Positive pressure on microphone diaphragm produces positive voltage on pin 2 (with respect to pin 3 of XLR
- output) and the tip of the 6.35 mm (1/4-inch) output.
- Operating Temperature Range: -18°C (0°F) to 50°C (122F)
- Storage Temperature Range: -29°C (-20°F) to 74°C (165°F)
- Gain Adjustment Range: −18 to +42 dB in 1 dB steps (plus Mute setting)
- XLR: balanced (1=ground, 2=audio +, 3=audio −)
- Impedance: 100 Ω
- Full Scale Output:
- LINE setting: +18 dBV
- MIC setting −12 dBV
- Mic/Line Switch: 30 dB pad
- Phantom Power Protection: Yes
- RF Input:
- Spurious Rejection: >80 dB, typical
- Connector Type: BNC
- Impedance: 50 Ω
- Bias Voltage: 12 to 13 V DC, 150 mA maximum, per antenna switchable on/off
- Cascade Output:
- Connector Type: BNC Note: For connection of one additional receiver in the same band
- Configuration: Unbalanced, passive
- Impedance: 50 Ω
- Insertion Loss: 0 dB
- Networking:
- Network Interface: Dual Port Ethernet 10/100 Mbps, 1Gbps, Dante Digital Audio
- Network Addressing Capability: DHCP or Manual IP address
- Maximum Cable Length: 100 m (328 ft)
- Dimensions: 44 x 482 x 274 mmH x W x D
- Weight:
- ULXD4Q 3.45 kg (7.6 lbs), without antennas
- Power Requirements:
- ULXD4Q 100 to 240 V AC, 50-60 Hz, 0.32 A max.
