Shure QLXD4-G50

Shure QLX-D Digital Wireless is the clear choice for exceptionally detailed wireless audio in widely diverse and demanding environments. A highly flexible system featuring streamlined setup and operation, QLX-D boasts impressive RF efficiency to get more channels on air using less spectrum, while the rugged all-metal construction withstands the rigors of constant use. From corporate seminars to music clubs, classroom lectures to houses of worship, Shure QLX-D Digital Wireless has it covered — delivering confident performance, no matter what the venue.

Half-rack QLXD4 Digital Wireless Receiver quickly finds open frequencies and deploys them to transmitters via the one-touch sync function.

Includes QLXD4, hardware for rack-mounting, power supply, two 1/2 wave antennas, 2 BNC cables, 2 BNC bulkhead Adapters, and user guide.

• Dimensions 41 mm × 197 mm × 151 mm (1.63 in. × 7.75 in. × 5.94 in.), H × W × D

• Weight 777 g (1.71 lbs), without antennas Housing Steel

• Power requirements 12 V DC @ 0.4 A, supplied by external power supply (tip positive)

• RF Input

• Spurious Rejection >80 dB, typical

• Connector Type BNC

• Impedance 50 Ω

• Audio Output

• Gain Adjustment Range -18 to +42 dB in 1 dB steps

• Confi guration 1/4" (6.35 mm): Impedance balanced (Tip=audio, Ring=no audio, Sleeve=ground) XLR: Balanced (1=ground, 2=audio +, 3=audio −)

• Impedance 1/4" (6.35 mm): 100 Ω (50 Ω Unbalanced)

• XLR: 100 Ω

• Full Scale Output 1/4" (6.35 mm): +12 dBV

• XLR: LINE setting= +18 dBV, MIC setting= −12 dBV

• Mic/Line Switch 30 dB pad

• Phantom Power Protection 1/4" (6.35 mm): Yes

• XLR: Yes

• Network Interface Single Port Ethernet 10/100 Mbps

• Network Addressing Capability DHCP or Manual IP address

• Maximum Ethernet Cable Length 100 m (328 ft)