- Main Features:
- Wide tuning range up to 184 MHz
- True digital diversity reception per channel for drop-out resistance
- Networked control with Wireless Workbench® software and ShurePlus™ Channels iOS app
- Quadversity mode for extended antenna coverage and improved RF signal-to-noise
- Front panel headphone jack enables Dante™ Cue and Dante™ Browse monitoring
- Configurable Ethernet switch for redundant Dante digital output
- Switchable XLR and AES3 outputs
- Channel Quality meter displays RF signal-to-noise
- Locking AC connectors
- Optional DC module available to support redundant power
- Specifications:
- RF Carrier Frequency Range: 470–960 MHz, varies by region
- Working Range: 100 m (330 ft) Note: Actual range depends on RF signal absorption, reflection and interference.
- RF Tuning Step Size: 25 kHz, varies by region
- Image Rejection: >70 dB, typical
- RF Sensitivity: −98 dBm at 10-5 BER
- Latency Analog Output:
- STD: 2.08 ms
- HD: 2.96 ms
- Audio Frequency Response:
- AD1: 20 – 20 kHz (±1 dB)
- AD2: Note: Dependent on microphone type
- Signal-to-Noise Ratio(Dynamic Range)(typical, 20 Hz to 20 kHz, receiver gain setting = -12 dB)
- XLR Line Output: 120 dB A-Weighted, 117 dB Unweighted
- Digital (AES3/Dante): 130 dB A-Weighted, 126 dB Unweighted
- Total Harmonic Distortion: -6 dBFS, 1 kHz, System Gain @ +10 <0.01%
- System Audio Polarity: Positive pressure on microphone diaphragm produces positive voltage on pin 2 (with respect to pin 3 of XLR output) and the tip of the 6.35 mm (1/4-inch) output.
- Operating Temperature Range: -18°C (0°F) to 50°C (122°F) Note: Battery characteristics may limit this range.
- Storage Temperature Range: -29°C (-20°F) to 65°C (149°F)
- Audio Output:
- Gain Adjustment Range: −18 to +42 dB in 1 dB steps (plus Mute setting)
- Configuration:
- XLR: Transformer Coupled Balanced (1=ground, 2=audio +, 3=audio −)
- TRS: Transformer Coupled Balanced (Tip = Audio +, Ring = Audio -, Sleeve = Ground)
- Impedance: 100 Ω, Typical, XLR Line Out
- Full Scale Output (200K Ωload):
- LINE setting: +18 dBV
- MIC setting: −12 dBV
- TRS: +8 dBV
- Mic/Line Switch: 30 dB pad
- Phantom Power Protection: Yes
- Dimensions: 44 x 483 x 333 mm H x W x D
- Weight: 4.8 kg (10.6 lbs), without antennas
- Housing: Steel; Extruded aluminum
- Power Requirements: 100 to 240 V AC, 50-60 Hz, 0.68 A max.
- Thermal Power Dissipation
- Maximum: 31 W (106 BTU/hr)
- Idle: 21 W (72 BTU/hr)
- DC Power Requirements: 10.5 to 32V DC4.0 A max.
- Network Interface: 10/100 Mbps, 1Gbps, Dante Digital Audio
- Network Addressing Capability: DHCP or Manual IP address
- Maximum Cable Length: 100 m (328 ft)
- Cascade Output:
- Connector Type: BNC (Note: For connection of one additional receiver in the same band)
- Configuration: Unbalanced, passive
- Impedance: 50 Ω
- Insertion Loss: 0 dB, typical
- RF Input:
- Spurious Rejection: >80 dB, typical
- Connector Type: BNC
- Impedance: 50 Ω
- Bias Voltage: 12 to 13.5 V DC, 150 mA maximum, per antenna switchable on-off
- RF Carrier Frequency Rangemodel dependent:
- AD4Q=A: 470–636 MHz
- AD4Q=B: 606–810 MHz
- AD4Q=C: 750–960 MHz
