BSW have the best brands of wireless antennas and accessories for all your audio and radio broadcast needs.
BSW PART: ALP690
The ALP690 is a high-performance active/passive UHF directional antenna with built-in RF amplifier for use with wireless microphone receivers or base station transmitters. The antenna is powered by DC bias inserted on the coaxial cable. When no bias
BSW PART: ARG25
ARG SERIES COAX CABLES Coaxial cables for remote antennas. Velcro tie wraps and straight BNC connectors on both ends. Belden 9913F is a low loss coaxial cable used for ARG25.ARG25 is a 25 ft. cable with 1.9 db loss per 100 ft.Note: Photo shows the 2
BSW PART: DFIN
The Diversity Fin™ Antenna is a multi-purpose antenna from RF Venue. It is designed to be used with wireless microphone systems and other UHF receivers incorporating diversity reception, and comprises orthogonal directional LPDA (log periodic dipole
BSW PART: HA8089
The Shure HA8089 Helical Antenna is a wideband UHF remote antenna for Shure wireless receivers, PSM transmitters and antenna distribution systems, so it'll work with your Shure system.Already an MVP at the Super Bowl, that media-saturated event where
BSW PART: ALP500
The Lectrosonics ALP500 antenna boasts a Log Periodic Dipole Array (LPDA) design that provides a useful directional pattern over a broad frequency bandwidth. With VSWR below 2:1 from 450 to 862 MHz, the broad bandwidth of the ALP500 covers a wide sec
BSW PART: ATW-CHG3A
Two-bay smart charging dock for use with 3000 Series handheld and body-pack transmitters. Charges NiMH batteries inside transmitters. Automatically shuts off if alkaline or damaged batteries are detected in transmitters. Up to 5 docks can be linked a
BSW PART: ARG15
ARG SERIES COAX CABLES Coaxial cables for remote antennas. Velcro tie wraps and straight BNC connectors on both ends. ARG15 is a 15 ft. cable with 2.0 db loss per 100 ft.Note: Photo shows the 2 ft model # ARG2.
BSW PART: ALPKIT
Accessory mounting kit for ALP600 or SNA600 antennas. For details, see page 2 of the PDF under More Product Info link at bottom of page.The ALP600 and SNA600 both include a 50 Ohm BNC connector and a 3/8"-16 stainless steel mounting stud. The mountin
BSW PART: ARG2
ARG SERIES COAX CABLES Coaxial cables for remote antennas. Velcro tie wraps and straight BNC connectors on both ends. ARG2 is a 2 ft. cable with 1.0 db loss per 100 ft.
BSW PART: UA505
Mounting Bracket, BNC Adapter for Remote Antenna
