Transmitters and Exciters

The CG-2000 from TASCAM provides reliable clock output with redundant systems for confident on-air broadcast operation. The Video Sync/Master Clock Generator includes four video clock outputs and a video clock input ensure tight synchronization with

The SD-488E is a Time Code Reader, Generator and Inserter for SD (Standard Definition) Serial Digital Interface (SDI) video. Linear Time Code (LTC), Digital Vertical Interval Time Code (D-VITC) and RP-188 Time Code are both read and generated by the

The ES-362UE is a 100 Minute Up/Down Timer. The ES-362UE is housed in a folded aluminum/plastic case. The timer is presettable via the front-mounted thumbwheel switch. Up, Down, Stop, Reset-to-zero, and Preset controls are provided on the top of the

The ES-171U is a small Time Code display designed to fit in a console mount application. The unit accepts, via a rear-mounted BNC connector, either ESE Time Code™ (TC76™, TC89™, or TC90™) or SMPTE/EBU Time Code. The ES-171U will automatically determi

The ES-219A is a Black-Burst / Sync Generator with four isolated outputs. The unit provides a dependable and stable composite black-burst signal for pre-blacking tapes and/or for general synchronization purposes. The output signal of the ES-219A cons

The ESE ES-110 GPS-based Frequency Generator generates a stable source of 10 MHz and 1 PPS using GPS (Global Positioning System) satellites as a reference. The unit provides 10 MHz in both Sine Wave and Square Wave (5 volt logic) form. The 1 PPS outp

The ES-101 is a low-cost yet very accurate GPS master clock/time code generator. The unit receives time and date information from Global Positioning System satellites and supplies this data to the user in the form of three (3) different types of time

The LX-5116U is a Wall Mount Analog Clock with a 16" viewing diameter. The LX-5116U is designed to operate as a Time Code Reader, Stand-Alone Clock or Impulse Clock. It can read, decode and display time information from most any Master Clock or other

WallTime is a NTP synchronized studio clock and notification system that works with your standard computer monitor or television. The clock is kept always in sync using Network Time Protocol (NTP). It can take the place of stand alone clock systems,

The ES-520UE is a 60 Minute Up Timer. Start, Stop and Reset controls are provided on the front of the case. A remote control input is accessible on the rear-mounted DB-9 connector, which also supplies ESE Timer Code for driving up to 100 remote slave

TASCAM’s CG-1800 is designed for post-production facilities that require solid video clock output in addition to precise word clock generation. Four video clock outputs and a video clock input ensure tight synchronization with video devices. The vide

The LX-221 is a six output Black-Burst / Sync Generator. The unit features enhanced black-burst circuitry and extremely precise stability. LX-221 provides a convenient source of RS-170A composite black-burst for pre-blacking tapes or for synchronizat