- Specifications:
- ANALOG:
- AD:
- Signal to Noise ratio (SNR) @ +19 dBu: 117 dB RMS unweighted, 121 dBA
- Frequency response @ 44.1 kHz, -0.1 dB: 5 Hz – 20.5 kHz
- Frequency response @ 96 kHz, -0.5 dB: 3 Hz – 45.5 kHz
- Frequency response @ 192 kHz, -1 dB: 2 Hz – 92.7 kHz
- THD @ -1 dBFS: -114 dB, 0.00015 %
- THD+N @ -1 dBFS: -112 dB, 0.00025 %
- Channel separation: > 110 dB
- Max Input Level AD: +19 dBu
- Input: XLR or 1/4" TRS, electronically balanced
- Input impedance balanced: 36 kOhm, unbalanced: 18 kOhm
- Input sensitivity switchable: +4 dBu, +13 dBu, +19 dBu @ 0 dBFS
- DA:
- Signal to Noise ratio (SNR): 117 dB RMS unweighted, 120 dBA
- Frequency response @ 44.1 kHz, -0.1 dB: 10 Hz – 20.2 kHz
- Frequency response @ 96 kHz, -0.5 dB: 5 Hz – 44.9 kHz
- Frequency response @ 192 kHz, -1 dB: 3 Hz – 88 kHz
- THD @ -1 dBFS: -112 dB, 0.00025 %
- THD+N @ -1 dBFS: -110 dB, 0.00032 %
- THD @ -3 dBFS: -116 dB, 0.00016 %
- Channel separation: > 110 dB
- Max Output Level DA: +19 dBu
- Output: XLR balanced, 1/4" TRS unbalanced/balanced
- Output impedance: XLR balanced 150 Ohm, TS unbalanced 100 Ohm
- Output level switchable: +4 dBu, +13 dBu, +19 dBu @ 0 dBFS
- DA - Phones as DA, except:
- Output: 6.3 mm stereo TRS, unbalanced
- Output impedance: 0.1 Ohm
- Output level at 0 dBFS, load 100 Ohm or up: +19 dBu (6.9 Vrms)
- Max power 32 Ohm load: 0.7 W per channel (0.01% THD, +16 dBu, 4.9 Vrms)
- THD 32 Ohm load @ +15 dBu: -110 dB, 0.0003 %
- Mode ANA (Analog In to Analog Out):
- Signal to Noise ratio (SNR) @ +19 dBu: 123 dB RMS unweighted, 126 dBA
- Signal to Noise ratio (SNR) @ +13 dBu: 119 dB RMS unweighted, 122 dBA
- Signal to Noise ratio (SNR) @ +4 dBu: 112 dB RMS unweighted, 115 dBA
- Frequency response -0.5 dB: 1 Hz – 120 kHz
- THD+N @ +19 dBu: -116 dB, 0.00016%
- Channel separation: > 120 dB
- Maximum input / output level: +22 dBu
- DIGITAL:
- Clocks: Internal, ADAT In, SPDIF In
- Jitter suppression of external clocks: > 50 dB (2.4 kHz)
- Effective clock jitter influence on AD and DA conversion: near zero
- PLL ensures zero dropout, even at more than 100 ns jitter
- Digital Bitclock PLL for trouble-free varispeed ADAT operation
- Supported sample rates with external clocking (SPDIF): 28 kHz up to 200 kHz
- Supported sample rates with external clocking (ADAT): 40 kHz up to 49 kHz
- Internal clocks: 32 kHz, 44.1 kHz, 48 kHz, 64 kHz, 88.2 kHz, 96 kHz, 176,8 kHz, 192 kHz
- Digital I/O:
- Digital input coaxial ground-free transformer coupled
- Formats: optical (TOSLINK), RCA (SPDIF, AES/EBU compatible)
- Format Consumer SPDIF according to IEC 60958
- Format Professional according to AES3-1992 Amendment 4
- SPDIF coaxial:
- RCA, according to IEC 60958
- High-sensitivity input stage RCA: < 0.2 Vpp input level
- Output voltage RCA Consumer 0.7 V, Professional 1.4 V
- Single Wire mode, sample rate 28 kHz up to 200 kHz
- SPDIF optical:
- 1 x optical, according to IEC 60958
- Sample rate 28 kHz up to 200 kHz
- ADAT:
- TOSLINK
- Standard: 8 channels 24 bit, up to 48 kHz
- Double Speed (S/MUX): 4 channels 24 bit 96 kHz
- Quad Speed (S/MUX4) : 2 channels 24 bit 192 kHz
- General:
- Included power supply: external switching PSU, 100 - 240 V AC, 2 A, 24 Watts
- Idle power consumption: 5,2 W (430 mA @ 12V)
- Max. power consumption: 10 Watts (830 mA @ 12 V)
- Dimensions (WxHxD): 215 x 44 x 130 mm (8.5" x 1.73" x 5.1")
- Weight: 900 g ( 2.0 lbs)
- Temperature range: +5° up to +50° Celsius (41° F up to 122°F)
- Relative humidity: < 75%, non condensing