null

Radio Design Labs DDS-BN2ML

RDL

BSW PART:
DDS-BN2ML

Bi-Directional Mic/Line Dante Interface 2 x 2 w/PoE - Stainless Steel

$707.83 $943.77
You save $235.94

The DDS-BN2ML is a complete wall-mounted Dante audio network interface. It features one XLR mic or line input and one mono-summed Mini-jack line input on the front panels, plus two line outputs on a rear-panel detachable terminal block. Special software is not required to configure the DDS-BN2ML. The XLR input provides three switches that may be set from the front of the unit when the cover plate is not installed. One switch enables or disables P48 phantom; the second switch selects the mic or line gain range; the third switch sets the gain. The Mini-jack input accepts mono or stereo unbalanced line-level sources that are summed to mono. Each rear-panel output provides a switch to set the output to balanced professional or unbalanced consumer level. The DDS-BN2ML fits a standard US dual-gang electrical box or an RDL WB-2 back box for installations in thinner European or equivalent walls. The DDS-BN2ML is PoE powered, and is available in multiple finishes with optional customized graphics.

$707.83 $943.77
You save $235.94

Free Shipping

Out of stock

Add to quote
Qualifies for free shipping
  • Main Features:
  • Dante Network Interface for Two Audio Inputs and Two Audio Outputs
  • XLR and Mini-jack Front-Panel Inputs; Outputs on Rear-Panel Terminal Block
  • Converts One Mic or Line and One Consumer Line Audio Source to Dante Network Channels
  • Converts Two Dante Network Audio Signals to Line Level
  • Special Software Not Required for Module Setup
  • XLR Input is Switch Selectable for Mic or Line
  • Switch-Selectable Mic Gain: 40 dB, 48 dB or 62 dB
  • Switch-Selectable 48 V Mic Phantom (P48)
  • Switch-Selectable Line Gain: Unity, 12 dB or 19 dB
  • Mini-jack -10 dBV Input is Summed to Mono
  • Each Output is Switch Selectable for Balanced +4 dBu or Unbalanced -10 dBV
  • Studio Quality, Low-Noise Performance
  • High Resolution 24 Bit Analog to Digital and Digital to Analog Conversion
  • Legendary RDL Analog Filtering Enhances Superb Audio Performance
  • Specifications:
  • Network Connector: RJ45 with Link and Speed indicators
  • Digital Audio Ethernet Protocol: Dante
  • Transmission Rate: 100 Mbps
  • Sample Rates Supported: 44.1 kHz, 48 kHz (default)
  • Bit Depth Supported: 24 bits
  • Audio Operating Level: -20 dBFS = +4 dBu
  • Reference Level: 0 dBFS = +24 dBu
  • Mic/Line Input to Network Interface:
  • Input: XLR (female)
  • Gain: Mic: 40 dB (LO), 48 dB (MED), 62 dB (HI); Line: Unity (LO), 8 dB (MED), 19 dB (HI)
  • Input Level (for +4 dBu/-20 dBFS): Mic: -36 dBu (LO), -44 dBu (MED), -58 dBu (HI); Line: +4 dBu (LO), -8 dBu (MED), -15 dBu (HI)
  • Input Level (maximum): Mic: -16 dBu (LO), -24 dBu (MED), -38 dBu (HI); Line: +24 dBu (LO), +12 dBu (MED), +5 dBu (HI)
  • Input Impedance: > 2.5 kΩ (MIC); > 5 kΩ (LINE)
  • Phantom Power: P48, 48 Vdc, switch-selectable
  • Standard for Phantom: IEC 61938: 2013
  • Selectors for input (3): Phantom, Mic/Line, Gain
  • Frequency Response: 20 Hz to 20 kHz (± 0.5 dB)
  • Equivalent Input Noise: -130 dBu (62 dB gain); -132 dBu A-Weighted
  • Noise below -20 dBFS (20 to 20 kHz): Mic: < -72 dB (LO), < -72 dB (MED), < -68 dB (HI);  Line: < -72 dB (LO), < -72 dB (MED), < -70 dB (HI)
  • THD+N: < 0.1% (20 Hz to 20 kHz, +4 dBu/-20 dBFS); 0.015% at 1 kHz (typ)
  • CMRR: > 65 dB (50 Hz to 120 Hz)
  • Crosstalk: Below Noise Floor (20 Hz to 20 kHz at operating level, any input to any input, max. mic gain)
  • Headroom: 20 dB
  • Line Input to Network Interface:
  • Input: Mini-jack Stereo (left and right summed to mono)
  • Input Level (for +4 dBu/-20 dBFS): -10 dBV nominal
  • Input Level (maximum): +10 dBV
  • Input Impedance: > 50 kΩ
  • Frequency Response: 20 Hz to 20 kHz (± 0.2 dB)
  • Noise below -20 dBFS (20 to 20 kHz): < -85 dB
  • THD+N: < 0.05% (20 Hz to 20 kHz, +4 dBu/-20 dBFS); 0.01% at 1 kHz (typ)
  • Headroom: 20 dB
  • Network to Line Outputs:
  • Outputs (2): Balanced, detachable terminal block
  • Output Level (operating): +4 dBu (nominal) balanced; -10 dBV (nominal) unbalanced, switch-selectable
  • Output Level (maximum): +24 dBu balanced; +10 dBV unbalanced
  • Output Impedance: 150 Ω balanced; 2.5 kΩ unbalanced
  • Frequency Response: 20 Hz to 20 kHz (± 0.5 dB)
  • THD+N: < 0.1%
  • THD: < 0.01% (1 kHz)
  • Noise: < -80 dB (below +4 dBu or -10 dBV); < -100 (below +24 dBu)
  • Crosstalk: Below Noise Floor (20 Hz to 20 kHz at operating level, output to output)
  • Headroom above +4 dBu or -10 dBV: 20 dB
  • Indicators (4): Ethernet Link and Speed (2, rear panel); Sync and Power (2, front panel)
  • Ambient Operating Environment: 0° C to 40° C; 30° C maximum recommended
  • Power Requirement: PoE Class 0, IEEE 802.3af
  • Specification Conditions: Gain/Level: ± 1 dB; Source termination: 150 Ω; A to D values measured in digital domain
  • Dimensions: 3.52" (8.94 cm) W; 4.11" (10.44 cm) H; 2.09" (5.31 cm) D
  • Package Type: Cardboard Box
  • Package Dimensions: 3.625 x 4.625 x 2.125 in.
  • Shipping Weight: 1.0 lbs.
  • WEEE weight: 0.845 lbs.
  • Tariff code: 8517.18.0050