This stereo set features two KM183MT miniature condenser mics, two SG 21/17 stand mount swivels and two WNS 100 windscreens in an attractive wooden box.
Packed with the same sophisticated electro-acoustic features found in higher-end Neumann microphones, these compact non-modular mics are nevertheless geared for serious production and home recording studios.
The omnidirectional KM183MT is a pressure transducer with a boost of approximately 7 dB at 10 kHz in the free field, and has a flat frequency response in the diffuse sound field. For more distant miking it offers a smooth increase in high-end response, ensuring a crisp sound. It offers the same balanced, phantom-powered output found in all Neumann microphones, and sports a classic black finish.
Workaholics, consider yourselves warned. You might never run out of ideas for putting these versatile little gems to use.
• Acoustical Operating Principle: Pressure transducer _
• Directional Pattern: Omnidirectional _
• Frequency Range: 20 Hz ... 20 kHz _
• Sensitivity at 1 kHz into 1 kohm: 12 mV/Pa _
• Rated Impedance: 50 ohms _
• Rated Load Impedance: 1000 ohms _
• Equivalent SPL CCIR 468-3: 24 dB _
• Equivalent SPL DIN/IEC 651: 13 dB-A _
• S/N Ratio CCIR 468-3: 70dB _
• S/N Ratio DIN/IEC 651: 81 dB _
• Maximum SPL for THD 0.5%: 140 dB _
• Maximum Output Voltage: 10 dBu _
• Dynamic Range of the Microphone Amplifier DIN/IEC 651: 124 dB _
• Supply Voltage: 48 V ± 4 V _
• Current Consumption 3.2 mA _
• Matching Connectors: XLR 3F _
• Weight (Each): Approx. 80 g (3 oz)
• Length (Each): 107 mm (4.2”)
