null

Lectrosonics DCR822 B1C1

LECTROSON

BSW PART:
DCR822-B1C1

Portable 2-channel digital receiver, Freq B1C1 (537.600 - 691.175 MHz)

$3,862.00 $5,390.00
You save $1,528.00

The DCR822 digital receiver provides the highest level of RF and audio performance available with a versatile feature set in a compact design for field and location production. Settings can be made from the front panel with tactile buttons and LCD interface, making the unit ideal for use in portable bag systems and on sound carts. An RF spectrum analyzer and SmartTune are built into the receiver to alleviate interference problems in an increasingly congested RF spectrum.

The mechanical design of the receiver fits into the same dimensions as the older UCR411A and combines field-proven features developed over many years of experience in motion picture and television production. To decrease weight, the DCR822 provides a dual channel receiver in one unit powered by 4 AA Lithium batteries or external DC. The receiver is also equipped with both an IR port and microSD card slot for data transfer. The machined aluminum housing and panels are surfaced with a hard-anodized finish with laser etched markings to withstand the rigors of field production.

$3,862.00 $5,390.00
You save $1,528.00

Free Shipping

Out of stock

Add to quote
Qualifies for free shipping
  • Main Features:
  • Dual independent channels, compact design
  • Vector Diversity with 2 RF front ends per channel for superior performance
  • 24 bit/48 kHz digital for flawless audio
  • High IP3 performance of +15 dBm for tough RF environments
  • Analog and AES3 digital audio outputs
  • 4 AA internal batteries or external DC powering options
  • On-board recording via microSDHC card
  • Specifications:
  • Receiver:
  • Operating Frequencies (MHz):
  • Model A1/B1: 470.100 - 614.375
  • Model B1/C1: 537.600 - 691.175
  • Frequency Selection Steps: 25 kHz
  • Frequency Response: 25 Hz to 20 kHz (+0/-3 dB)
  • Frequency Stability: ±0.001 %
  • Front end bandwidth: ±5.5 MHz, @ -3 dB
  • Sensitivity:
  • 20 dB Sinad: 0.9 uV(-108 dBm), A weighted
  • 60 dB Quieting: 1.12 uV (-105 dBm), A weighted
  • AM rejection: >60 dB, 2 uV to 1 Volt
  • Modulation acceptance: 85 kHz
  • Spurious rejection: 85 dB
  • Third order intercept: +15 dBm
  • Diversity method: Vector Diversity
  • Antenna inputs: Dual SMA female jacks; 50 Ohm impedance
  • Audio output: Rear panel 2 TA3M connectors; can drive 600 Ohm, adjustable from -50 to +5 dBu in 1 dB steps (into nominal 10 k bal. load
  • Input Dynamic Range: 125 dB (with full Tx limiting)
  • Overall Latency (time delay): 1.4 ms with digital source, <2.9 ms with Hybrid TX
  • Audio Test Tone: 1 KHz, -50 to +5 dBu, <1%THD
  • Controls:
  • Front Panel:
  • LCD display
  • - Menu/Sel, Pwr/Back, Up/Down Arrow Buttons
  • - SD Card Reader
  • - IR Port
  • Rear Panel:
  • Analog/AES audio output jack (2)
  • - External DC input
  • - Battery compartment
  • - USB port
  • External Power: Minumum 9 Volts to maximum 17 VDC 2.5 W; 170 mA at 12 VDC
  • Battery Life: 6 hrs. continuous, w/ 4 disposable, 1.5VDC AA Lithium batteries (recommended)
  • Weight: 408 grams with batteries (14.4 oz.)
  • Dimensions: 3.23” wide x 1.23” high x 4.75” deep 82.042 wide x 31.242 high x 120.650 deep mm
  • Recorder:
  • Storage media: microSDHC memory card
  • File format: .wav files (BWF)
  • A/D converter: 24-bit
  • Sampling rate: 48 kHz
  • Recording modes/Bit rate: 24 bit - 144 kbytes/s per channel (up to 4)
  • Audio Performance:
  • Frequency response: 25Hz to 20 kHz; +0/-3 dB
  • Dynamic range: 110 dB (A), before limiting
  • Distortion: < 0.035%
  • Operating temperature range:
  • Celsius: -20 to 50
  • Fahrenheit: -5 to 122