- dbx 215s Features:
- Dual 15-band, 2/3-octave Constant Q frequency bands
- Switchable boost/cut ranges of ±6 or ±12 dB
- Front panel bypass switch
- ±12dB input gain range
- 4-segment LED ladders for monitoring output levels
- XLR and TRS I/O
- Frequency Response of <10 Hz to >50 kHz
- Dynamic range of greater than 108 dB
- INPUTS:
- Connectors: 1/4" TRS, female XLR (pin 2 hot)
- Type: Electronically balanced/unbalanced, RF filtered
- Impedance: Balanced 40k ohm, unbalanced 20k ohm
- Maximum Input Level: >+21dBu balanced or unbalanced
- CMRR: >40dB, typically >55dB at 1kHz
- OUTPUTS:
- Connectors: 1/4" TRS, male XLR (pin 2 hot)
- Type: Impedance balanced/unbalanced, RF filtered
- Impedance: Balanced 100 ohm, unbalanced 50 ohm
- Maximum Output Level: >+21dBu balanced/unbalanced into 2k ohm or greater; >+18dBm balanced/unbalanced (into 600 ohm)
- SYSTEM PERFORMACE:
- Bandwidth: 20Hz to 20kHz, +0.5/-1dB
- Frequency Response: <10Hz to >50kHz, +0.5/-3dB
- Dynamic Range: 108dB
- Signal-to-Noise: 90dB
- THD+Noise: <0.004%
- Interchannel Crosstalk: <-80dB, 20Hz to 20kHz
- FUNCTION SWITCHES:
- EQ Bypass: Bypasses the graphic equalizer section in the signal path
- Low Cut: Activates the 50Hz 12dB/octave high-pass filter
- Range: Selects either +/- 6dB or +/- 12dB slider boost/cut range
- POWER SUPPLY:
- Operating Voltage: 100VAC 50/60Hz, 120VAC 60Hz, 230VAC 50/60Hz
- Power Consumption: 12W
- Main Connection: IEC receptacle
