null
Illustrative image of: Crown Broadcast FM30E: Exciters: FM30E

Crown Broadcast FM30E

CROWN_B

BSW PART:
FM30E

30-Watt FM Exciter - Composite Input Only

More Transmitters and Exciters More Crown Broadcast

Contact BSW for your pricing and shipping!

The FM30E is an economical stand-alone 30W FM transmitter that delivers a high level of performance. It is a basic exciter with composite input only.

Featuring low loss circuit boards and copper heat spreaders in the RF chain, it functions with less heat and improved life span. A robust power supply with switching voltage and power regulators for AC or DC operation let you use it anywhere power can be generated.

Contact BSW for your pricing and shipping!

Out of stock

Add to quote
  • Crown Broadcast FM30E Features:
  • Basic exciter with composite input
  • Frequency Agile from front panel
  • SWR metering from remote control
  • Ability to control output power from remote control
  • 5-Year warranty
  • Meets or exceeds all FCC requirements
  • To see the owners manual for the Crown FM 30, click on this
  • .
  • 87 to 108MHz (Japanese frequency available 74-90MHz as an option) Front panel agile
  • 3 to 30 watts with front panel adjustment
  • 50 Ohms unbalanced
  • 1.7:1 Maximum with automatic foldback at higher VSWR
  • Better than +/- 1KHz over operating temperature range
  • Direct Frequency Modulation of Carrier
  • LED Indicators with Peak indicators
  • Better than 60 dB (70 to 80 dB typical)
  • Better than 50 dB referenced to 100% modulation @ 100 Hz, no de-emphasis.
  • Better than 50 dB with 100% modulation @ 100 Hz, no de-emphasis (typical >60dB)
  • Better than –65 dB (75 dB typical)
  • +/- 120 KHz, better than –35 dB; +/- 240 KHz better than –45 dB
  • 0 to 50 degrees C
  • 0 to 80% @ 20 degrees C (non-condensing)
  • 10,000 ft (3,000 m)
  • 100 to 120 or 220 to 240 volts AC +/- 10%, 50 to 60 Hz
  • Greater than 97% (lagging)
  • 36 to 48 VDC (48V required for full output)
  • 100VA
  • Meets FCC requirements
  • Standard type N, 50 Ohm
  • 5.25 x 16.5 x 17.5 inches (13.4 x 41.9 x 44.5 cm) exclusive of rack mounts but inclusive of connectors
  • 25 pounds (11.3 Kg) shipping weight = 33 Pounds (14.9 Kg)
  • 1
  • 3.8 Vp-p for +/-75KHz deviation
  • < 0.05% from 50Hz to 15 Hz (0.03 typical)
  • 3
  • 3.8 Vp-p for +/-75KHz deviation
  • +/-0.3 dB from 40Hz to 100KHz
  • *Please consult a broadcast engineer to determine if this unit is right for your application and you are meeting all of the appropriate legal requirements. You can review the FCC regulations on LPFM and unlicensed usage below.